Kodak DVD Player SD 530ESE User Manual

DVD PLAYER  
OWNERS MANUAL  
MODEL : SD-530ESE  
Before connecting, operating or adjusting this product,  
please read this instruction booklet carefully and completely.  
1-2  
 
Table of Contents  
Operation with Audio CD and MP3/WMA Disc . . 22-23  
Playing an Audio CD and MP3/WMA Disc . . . . . 22  
Notes on MP3/WMA Recordings . . . . . . . . . . . . 22  
z Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
z Moving to another Track . . . . . . . . . . . . . . . 23  
z Repeat Track/ All/ Off. . . . . . . . . . . . . . . . . . 23  
z Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
z Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
z Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 23  
z Selecting the sound enhancement . . . . . . . 23  
z Changing the Audio Channel . . . . . . . . . . . . 23  
Operation with JPEG Disc. . . . . . . . . . . . . . . . . . . 24  
Viewing a JPEG disc . . . . . . . . . . . . . . . . . . . . . 24  
z Moving to another File . . . . . . . . . . . . . . . . . 24  
z Still Picture . . . . . . . . . . . . . . . . . . . . . . . . . 24  
z To flip the picture . . . . . . . . . . . . . . . . . . . . . 24  
z To rotate picture. . . . . . . . . . . . . . . . . . . . . . 24  
z Notes on JPEG Recordings . . . . . . . . . . . . . 24  
Programmed Playback . . . . . . . . . . . . . . . . . . . . . 25  
Programmed Playback with Audio CD and  
MP3/WMA Disc . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Programmed Playback with Video CD . . . . . . . . 25  
z Repeat Programmed Tracks . . . . . . . . . . . . 25  
z Erasing a Track from Program List. . . . . . . . 25  
z Erasing the Complete Program List . . . . . . . 25  
Additional Information . . . . . . . . . . . . . . . . . . . 26-27  
Screen Saver. . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Dimmer Function . . . . . . . . . . . . . . . . . . . . . . . . 26  
System Select . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Video Mode Setting . . . . . . . . . . . . . . . . . . . . . . 26  
Speaker Settings . . . . . . . . . . . . . . . . . . . . . . . . 27  
Introduction  
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2  
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . 3  
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6  
Playable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Front Panel and Display Window . . . . . . . . . . . . . . 7  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Preparation  
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11  
Connecting to a TV . . . . . . . . . . . . . . . . . . . . . . 10  
Connecting to Optional Equipment . . . . . . . . . . . 11  
Before Operation . . . . . . . . . . . . . . . . . . . . . . . 12-17  
General Explanation. . . . . . . . . . . . . . . . . . . . . . 12  
On-Screen Display . . . . . . . . . . . . . . . . . . . . 12-13  
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . 14-17  
z Initial Settings General Operation. . . . . . . . . 14  
z Language . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
z Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
z Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
z Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
z Parental Control. . . . . . . . . . . . . . . . . . . . . . 17  
Operation  
Operation with DVD and Video CD . . . . . . . . . 18-21  
Playing a DVD and Video CD. . . . . . . . . . . . . . . 18  
General Features. . . . . . . . . . . . . . . . . . . . . . . . 18  
z Moving to another TITLE/GROUP . . . . . . . . 18  
z Moving to another CHAPTER/TRACK . . . . . 18  
z Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
z Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
z Still Picture and Frame-by-Frame Playback . 19  
z Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 19  
z Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
z Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 19  
z Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
z Time Search . . . . . . . . . . . . . . . . . . . . . . . . 19  
z Selecting the sound enhancement . . . . . . . . 20  
z Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
z Marker Search. . . . . . . . . . . . . . . . . . . . . . . 20  
Special DVD Features . . . . . . . . . . . . . . . . . . . . 20  
z Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
z Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
z Camera Angle . . . . . . . . . . . . . . . . . . . . . . . 20  
z Changing the Audio Language. . . . . . . . . . . 20  
z Changing the Audio Channel . . . . . . . . . . . . 20  
z Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
DVD Audio Discs . . . . . . . . . . . . . . . . . . . . . . . . 21  
Reference  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Language Code List . . . . . . . . . . . . . . . . . . . . . . . 29  
Area Code List. . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
About the symbols for instructions  
Indicates hazards likely to cause harm to the unit  
itself or other material damage.  
Indicates special operating features of this unit.  
Indicates tips and hints for making the task easier.  
z
Moving to another GROUP . . . . . . . . . . . . . . 21  
z Viewing another PAGE. . . . . . . . . . . . . . . . . 21  
1-4  
 
Before Use  
Disc-related terms  
Title (DVD video discs only)  
Playable Discs  
The main film content or accompanying feature content  
or additional feature content, or music album.  
Each title is assigned a title reference number enabling  
you to locate it easily.  
DVD video discs  
(8 cm / 12 cm disc)  
DVD audio discs  
(8 cm / 12 cm disc)  
Group (DVD audio discs only)  
Video CD (VCD)  
(8 cm / 12 cm disc)  
The main audio content or accompanying feature  
content or additional feature content, or music album.  
Each group is assigned a group reference number  
enabling you to locate it easily.  
Audio CD  
(8 cm / 12 cm disc)  
In addition, this unit can play a DVD-R, DVD±RW,  
Kodak PICTURE CD, SVCD, and CD-R or CD-RW that  
contains audio titles, MP3, WMA or JPEG files.  
Chapter(DVD video discs only)  
Sections of a picture or a musical piece that are smaller  
than titles. A title is composed of one or several chap-  
ters. Each chapter is assigned a chapter number,  
enabling you to locate the chapter you want. Depending  
on the disc, chapters may not be recorded.  
Notes  
– Depending on the conditions of the recording equip-  
ment or the CD-R/RW disc itself, some CD-R/RW  
discs cannot be played on the unit.  
Track (DVD audio discs,Video CD  
and audio CD only)  
– Do not attach any seal or label to either side (the  
labeled side or the recorded side) of a disc.  
Sections of a picture or a musical piece on a video CD  
or an audio CD. Each track is assigned a track number,  
enabling you to locate the track you want.  
Do not use irregularly shaped CDs (e.g., heart-shaped  
or octagonal). It may result in malfunctions.  
Scene  
Notes on DVDs and Video CDs  
On a video CD with PBC (Playback control) functions,  
moving pictures and still pictures are divided into sec-  
tions called Scenes. Each scene is displayed in the  
menu screen and assigned a scene number, enabling  
you to locate the scene you want.  
Some playback operations of DVDs and Video CDs  
may be intentionally fixed by software manufacturers.  
As this unit plays DVDs and Video CDs according to  
disc content designed by the software manufacturer,  
some playback features of the unit may not be available  
or other functions may be added.  
A scene is composed of one or several tracks.  
Refer also to the instructions supplied with the DVDs  
and Video CDs. Some DVDs made for business pur-  
poses may not be played on the unit.  
Types of video CDs  
There are two types of video CDs:  
Video CDs equipped with PBC (Version 2.0)  
PBC (Playback control) functions allow you to interact  
with the system via menus, search functions, or other  
typical computer-like operations. Moreover, still pictures  
of high resolution can be played if they are included in  
the disc.  
Regional code of the DVD player and DVDs  
This DVD player is designed and manufactured  
for playback of region 2encoded DVD soft-  
ware. The region code on the labels of some DVD discs  
indicates which type of player can play those discs. This  
unit can play only DVD discs labeled 2or ALL. If you  
try to play any other discs, the message Check Regional  
Codewill appear on the TV screen. Some DVD discs  
may not have a region code label even though their play-  
back is prohibited by area limits.  
2
Video CDs not equipped with PBC (Version 1.1)  
Operated in the same way as audio CDs, these discs  
allow playback of video pictures as well as sound, but  
they are not equipped with PBC.  
1-5  
 
Before Use (Continued)  
Precautions  
Storing discs  
After playing, store the disc in its case.  
Handling the unit  
Do not expose the disc to direct sunlight or sources of  
heat, or leave it in a parked car exposed to direct sun-  
light, as there may be a considerable temperature  
increase inside the car.  
When shipping the unit  
The original shipping carton and packing materials  
come in handy. For maximum protection, re-pack the  
unit as it was originally packed at the factory.  
Cleaning discs  
When setting up the unit  
Fingerprints and dust on the disc can cause poor pic-  
ture quality and sound distortion. Before playing, clean  
the disc with a clean cloth. Wipe the disc from the cen-  
ter out.  
The picture and sound of a nearby TV, VCR, or radio  
may be distorted during playback. In this case, position  
the unit away from the TV, VCR, or radio, or turn off the  
unit after removing the disc.  
To keep the exterior surfaces clean  
Do not use volatile liquids, such as insecticide spray,  
near the unit. Do not leave rubber or plastic products in  
contact with the unit for a long period of time. They will  
leave marks on the surface.  
Cleaning the unit  
Do not use strong solvents such as alcohol, benzine,  
thinner, commercially available cleaners, or anti-static  
spray intended for older vinyl records.  
To clean the cabinet  
Use a soft, dry cloth. If the surfaces are extremely dirty,  
use a soft cloth lightly moistened with a mild detergent  
solution. Do not use strong solvents such as alcohol,  
benzine, or thinner, as these might damage the surface  
of the unit.  
About Symbols  
About the  
symbol display  
To obtain a clear picture  
The DVD player is a high-tech, precision device. If the  
optical pick-up lens and disc drive parts are dirty or  
worn, the picture quality will be poor.  
Regular inspection and maintenance are recommended  
after every 1,000 hours of use. (This depends on the  
operating environment.)  
may appear on the TV screen during operation.  
This icon means the function explained in this owners  
manual is not available on that specific DVD video disc.  
About the disc symbols for instructions  
A section whose title has one of the following symbol is  
applicable only to the disc represented by the symbol.  
For details, please contact your nearest dealer.  
Notes on Discs  
DVD-V DVD Video discs  
DVD-A DVD Audio discs  
Handling discs  
VCD2.0  
VCD1.1  
Video CDs with the PBC (playback control)  
function.  
Do not touch the playback side of the disc.  
Hold the disc by the edges so that fingerprints will not  
get on the surface.  
Video CDs without the PBC (playback control)  
function.  
Do not stick paper or tape on the disc.  
CD  
Audio CDs.  
MP3 MP3 disc.  
WMA WMA disc.  
JPEG JPEG disc.  
1-6  
 
Front Panel and Display Window  
PLAY (  
)
Power indicator  
Starts playback.  
Lights green when the  
DVD player is turned on.  
STOP (  
)
Stops playback.  
ON/STANDBY ( /  
)
Switches the player ON  
and OFF.  
PAUSE (  
)
Pause playback temporarily/ press repeatedly  
TOP MENU  
Displays the discs Title menu,  
if available.  
for frame-by-frame playback.  
Forward SKIP (  
)
Go to NEXT chapter/track.  
Press and hold for two seconds for  
a fast forward search.  
MENU  
Accesses menu on a DVD disc.  
RETURN  
- Removes the setup menu.  
- Displays the menu of a  
video CD with PBC.  
Reverse SKIP (  
)
Go to the beginning of the current  
chapter/track or press twice in quick  
successions to go to PREVIOUS  
chapter/track. Press and hold for two  
seconds for a fast reverse search.  
OPEN/CLOSE (  
Opens or closes the disc tray.  
)
Disc Tray  
Insert a disc here.  
3/4/1/2 (up/down/left/right)  
Selects an item in the menu.  
Remote Sensor  
Point the DVD Player remote control here.  
Display window  
Shows the current status  
of the player.  
ENTER  
Confirms menu selection.  
TITLE Indicates current title number  
ANGLE active  
DVD video disc inserted  
DVD  
CHP/TRK Indicates current chapter or track number  
DVD A  
DVD audio disc inserted  
CD Audio CD inserted  
VCD Video CD inserted  
Indicates total playing time/elapsed time  
MP3 MP3 or WMA disc  
PROG. Programmed playback active  
inserted  
RANDOM RANDOM playback  
active  
Indicates current player  
function:  
Playback, Pause, etc.  
Indicates repeat  
mode  
MP3 VCD  
CD DVD A  
TITLE  
CHP/TRK  
PROG.  
RANDOM ALL  
A
B
1-7  
 
Remote Control  
SETUP  
ON/STANDBY  
Accesses or removes setup menu.  
Switches DVD Player ON and OFF.  
OPEN/CLOSE  
E.A.M.  
Opens and closes the disc tray.  
Selects sound mode during disc  
playback.  
0-9 number buttons  
Selects numbered items in a menu.  
PROGRAM  
Enters to the program edit mode or  
exits from that.  
FL DIM  
Controls the Display Windows light.  
CLEAR  
TOP MENU  
Displays the discs Title menu, if  
available.  
Removes a track number on the  
program list or a mark on the  
MARKER SEARCH menu.  
MENU •  
Accesses menu on a DVD disc.  
MARKER  
Marks any point during playback.  
RETURN •  
- Removes the setup menu.  
- Displays the menu of a video CD  
with PBC.  
DISPLAY  
Accesses On-Screen display.  
ANGLE  
Selects a DVD camera angle if  
available  
ZOOM •  
Enlarges video image.  
SUBTITLE  
Selects a subtitle language.  
PLAY (  
Starts playback.  
) •  
AUDIO  
REV (Reverse) (  
) •  
Selects an audio language (DVD) or  
an audio channel (CD).  
Search backward.  
FWD (Forward) (  
) •  
RANDOM  
Plays tracks in random order.  
Search forward.  
Reverse SLOW (  
Reverse slow playback.  
) •  
PAUSE/STEP (  
/
)
Pauses playback temporarily/ press  
repeatedly for frame-by-frame  
playback.  
Forward SLOW (  
Forward slow playback.  
) •  
SEARCH  
STOP ( ) •  
Displays MARKER SEARCH menu.  
Stops playback.  
A-B RPT  
Repeat sequence.  
Forward SKIP (  
Advances to next chapter or track.  
) •  
REPEAT  
Reverse SKIP ( ) •  
Repeat chapter, track, title, group,  
all.  
Returns to beginning of current  
chapter or track or press twice in  
quick successions to go to previous  
chapter or track.  
ENTER  
Confirms menu selection.  
3/4/1/2 (up/down/left/right)  
Selects an item in the menu.  
Remote control battery installation  
Remote Control Operation Range  
Detach the battery cover on the rear of  
the remote control, and insert two R03  
(size AAA) batteries with  
aligned correctly.  
Point the remote control at the remote sensor and  
press the buttons.  
z Distance: About 23 ft (7 m) from the front of the  
remote sensor.  
z Angle: About 30° in each direction of the front of the  
remote sensor.  
AAA  
A A A  
and  
Caution  
Do not mix old and new batteries. Never mix different  
types of batteries (standard, alkaline, etc.).  
1-8  
 
Rear Panel  
COAXIAL (Digital audio out jack)  
Connect to digital (coaxial) audio equipment.  
AUDIO OUT (Left/Right)  
Connect to an amplifier, receiver,  
or stereo system.  
VIDEO OUT  
Connect to a TV with video inputs.  
VIDEO OUTPUT Switch  
Select either SCART or COMPONENT/PROGRES-  
SIVE SCAN, depending on how you connect DVD  
Player to the TV.  
TO TV (SCART) Jack  
Connect to a TV with SCART jack.  
5.1 CHANNEL AUDIO OUT  
Connect to a 5.1 channel receiver  
center speaker connection  
subwoofer connection  
front speakers connections  
rear (surround) speakers connections  
COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr)  
Connect to a TV with Y Pb Pr inputs.  
S-VIDEO OUT  
Connect to a TV with S-Video inputs.  
AC Power Cord  
Plug into the power source.  
OPTICAL (Digital audio out jack)  
Connect to digital (optical) audio equipment.  
Do not touch the inner pins of the jacks on the rear  
panel. Electrostatic discharge may cause permanent  
damage to the unit.  
1-9  
 
Connections  
Progressive Scan (ColorStream®Pro) connection  
Tips  
z If your television is a high-definition or digital ready”  
television, you may take advantage of the DVD  
Players progressive scan output for the highest  
video resolution possible.  
z Depending on your TV and other equipment you wish  
to connect, there are various ways you could connect  
the player. Use only one of the connections  
described below.  
z If your TV does not accept the Progressive Scan for-  
mat, the picture will appear scrambled if you try  
Progressive Scan on the DVD Player.  
z Please refer to the manuals of your TV, VCR, Stereo  
System or other devices as necessary to make the  
best connections.  
z For better sound reproduction, connect the players  
AUDIO OUT jacks to the audio in jacks of your  
amplifier, receiver, stereo or audio/video equipment.  
See Connecting to Optional Equipmenton page 11.  
Connect the COMPONENT VIDEO OUT/  
1
PROGRESSIVE SCAN jacks on the DVD Player to  
the corresponding in jacks on the TV using the  
Y Pb Pr cable (C).  
Caution  
Make sure the DVD Player is connected directly to the  
TV. Tune the TV to the correct video input channel.  
Connect the Left and Right AUDIO OUT jacks of  
2 the DVD Player to the audio left/right in jacks on the  
TV (A) using the audio cables.  
Do not connect the DVD Players AUDIO OUT jack to  
the phono in jack (record deck) of your audio system.  
Do not connect your DVD Player via your VCR. The  
DVD image could be distorted by the copy protection  
system.  
Notes  
Set the Progressive to Onon the setup menu for  
progressive signal, see page 14.  
Connecting to a TV  
Set the Progressive to Offby removing any disc  
from the unit and close the disc tray. See that no  
discis displayed on the display window. Then press  
STOP and hold it for five seconds before releasing it.  
Progressive scan does not work with the analog video  
connections (yellow VIDEO OUT jack) or S-VIDEO  
connection.  
z Make one of the following connections, depending on  
the capabilities of your existing equipment.  
z When using the COMPONENT VIDEO OUT jacks,  
set the VIDEO OUTPUT switch to COMPONENT.  
When using the SCART jack, set the VIDEO OUT-  
PUT switch to SCART.  
Video connection (Good)  
Rear of TV  
SCART INPUT  
Connect the VIDEO OUT jack on the DVD Player to  
S-VIDEO  
INPUT  
VIDEO  
INPUT  
COMPONENT VIDEO  
/
AUDIO INPUT  
PROGRESSIVE SCAN INPUT  
1
the video in jack on the TV using the video cable (V).  
Y
L
Pr  
Pb  
R
Connect the Left and Right AUDIO OUT jacks of  
2
the DVD Player to the audio left/right in jacks on the  
TV (A) using the audio cables.  
S-Video connection (Better)  
Connect the S-VIDEO OUT jack on the DVD Player  
to the S-Video in jack on the TV using the S-Video  
cable (S).  
C
S
A
V
T
1
Connect the Left and Right AUDIO OUT jacks of  
the DVD Player to the audio left/right in jacks on the  
TV (A) using the audio cables.  
2
Component Video (ColorStream®) connection (Best)  
Connect the COMPONENT VIDEO OUT/  
PROGRESSIVE SCAN jacks on the DVD Player to  
the corresponding in jacks on the TV using the  
Y Pb Pr cable (C).  
1
Rear of DVD player  
Connect the Left and Right AUDIO OUT jacks of  
2
the DVD Player to the audio left/right in jacks on the  
TV (A) using the audio cables.  
Note  
If the TV has an S-video input, connect the DVD player  
with the S-video cable. When using an S-video cable,  
do not connect the yellow video cable.  
SCART connection  
Connect the TO TV scart jack on the DVD Player to the  
corresponding in jacks on the TV using the scart cable (T).  
1-10  
 
Connections (Continued)  
Connecting to Optional Equipment  
Notes  
If the audio format of the digital output does not match  
the capabilities of your receiver, the receiver will  
produce a strong, distorted sound or no sound at all.  
Connecting to an amplifier equipped with two  
channel analog stereo or Dolby Pro Logic ll/  
Pro Logic  
Six Channel Digital Surround Sound via digital con-  
nection can only be obtained if your receiver is  
equipped with a Digital Multi-channel decoder.  
To see the audio format of the current DVD in the on-  
screen display, press AUDIO.  
Connect the Left and Right AUDIO OUT jacks on the  
DVD Player to the audio left and right in jacks on your  
amplifier, receiver, or stereo system, using the audio  
cables (A).  
Repeated pressing of the AUDIO button may allow  
you to select between various audio formats available  
on the disc.  
Connecting to an amplifier equipped with two  
channel digital stereo (PCM) or to an Audio/  
Video receiver equipped with a multi-channel  
decoder (Dolby Digital, MPEG 2, or DTS)  
Note  
This player does not perform internal (2 channel)  
decoding of a DTS sound track. To enjoy DTS multi  
channel surround, you must connect this player to a  
DTS compatible receiver via one of this players  
digital audio outputs. There will be no output at 6  
channel connectors of this player when DTS is selected.  
Connect one of the DVD Players DIGITAL AUDIO  
1
OUT jacks (OPTICAL O or COAXIAL X) to the cor-  
responding in jack on your amplifier. Use an option-  
al digital (optical O or coaxial X) audio cable.  
You will need to activate the players digital output.  
2 (See Digital Audio Outputon page 15).  
Analog connection to a multi-channel A/V receiver  
with 6 Channel connectors (Dolby Digital)  
Digital Multi-channel sound  
This DVD Player contains a multi-channel decoder. This  
enables playback of DVDs recorded in Multi-channel  
Surround without the need for an optional decoder.  
A digital multi-channel connection provides the best  
sound quality. For this you need a multi-channel  
Audio/Video receiver that supports one or more of the  
audio formats supported by your DVD Player (MPEG 2,  
Dolby Digitaland DTS). Check the receiver manual  
and the logos on the front of the receiver.  
Connect the CENTER and WOOFER jacks for the  
1
Center speaker and the Subwoofer (C) to the corre-  
sponding in jacks on your receiver.  
Connect the Left and Right FRONT speaker jacks  
Caution:  
2 (F) to the corresponding in jacks on your receiver.  
Due to the DTS Licensing agreement, the digital output  
will be in DTS digital out when DTS audio stream is  
selected.  
Connect the Left and Right REAR speaker jacks  
3 (R) to the corresponding in jacks on your receiver.  
Make the appropriate Sound settings for Analog  
4 Output and Speaker Settings in the setup menu.  
See page 15.  
Rear of DVD player  
Rear of  
DVD player  
F
O
X
A
C
Front R  
Rear R  
Front L  
Center  
Rear L Subwoofer  
ANAOG 5.1CH AUDIO INPUT  
R
L
R
OPTICAL  
COAXIAL  
Amplifier  
(Receiver)  
DIGITAL INPUT  
AUDIO INPUT  
Amplifier (Receiver)  
1-11  
 
Before Operation  
Temporary Feedback Field Icons  
General Explanation  
TITLE  
Repeat Title  
This manual gives basic instructions for operating the  
DVD Player. Some DVDs require specific operation or  
allow only limited operation during playback. When this  
CHAPT  
Repeat Chapter  
GROUP  
Repeat Group (DVD audio discs only)  
occurs, the symbol  
appears on the TV screen, indi-  
TRACK  
Repeat Track (non-PBC Video CDs and DVD  
audio discs only)  
cating that the operation is not permitted by the DVD  
Player or is not available on the disc.  
ALL  
Repeat All Tracks (non-PBC Video CDs only)  
On-Screen Display  
A
B
Repeat A-B  
General playback status can be displayed on the TV  
screen. Some items can be changed on the menu.  
OFF  
Repeat Off  
Resume play from this point  
Action prohibited or not available  
On-screen display operation  
Press DISPLAY during playback.  
1
Notes  
z Some discs may not provide all of the features on the  
on-screen display example shown below.  
z If no button is pressed for 10 seconds, the on-screen  
display disappears.  
Press  
/
to select an item.  
2 The selected item will be highlighted.  
Press  
/
to change the setting of an item.  
3 The number buttons can also be used for setting  
numbers (e.g., title number). For some functions,  
press ENTER to execute the setting.  
DVD-V  
Items  
Function (Press  
/
to select desired item)  
Selection Method  
Title Number  
Shows the current title number and total number of  
titles, and skips to the desired title number.  
/
, or  
1 /3  
1 /12  
Numbers, ENTER  
Chapter Number  
Time search  
Shows the current chapter number and total number of  
chapters, and skips to the desired chapter number.  
/
, or  
Numbers, ENTER  
Shows the elapsed playing time, and  
searches the point by the elapsed time directly.  
0:20:09  
Numbers, ENTER  
Audio language  
and Digital Audio  
Output mode  
1 ENG  
D
5.1 CH  
Shows the current audio soundtrack language,  
encoding method, and channel number, and  
changes the setting.  
/
, or  
AUDIO  
Subtitle language  
Shows the current subtitles language, and  
changes the setting.  
/
, or  
OFF  
1 /1  
SUBTITLE  
Angle  
Shows the current angle number and total number of  
angles, and changes the angle number.  
/
, or  
ANGLE  
Sound  
Shows the current sound mode, and  
changes the setting.  
/
, or  
NORM.  
E.A.M.  
1-12  
 
Before Operation (Continued)  
On-Screen Display (Continued)  
DVD-A  
Items  
Function (Press 3/4to select desired item)  
Selection Method  
Group Number  
Shows the current group number and total number  
of groups, and skips to the desired group number.  
1
/
2
, or  
2 /6  
1 /12  
Numbers, ENTER  
Track Number  
Time search  
Shows the current track number and total number  
of tracks, and skips to the desired track number.  
1
/
2
, or  
Numbers, ENTER  
Shows the elapsed playing time.(Display only)  
0:10:15  
_
DVD Audio  
Output mode  
1
Shows the current encoding method, and channel  
number, and changes the setting.  
1
/
2
, or  
PPCM  
5 CH  
AUDIO  
Shows the current subtitles language, and  
changes the setting.  
1 2  
, or  
SUBTITLE  
/
Subtitle language  
Page (or Angle)  
OFF  
Shows the current page (or angle) number and total number  
of pages (or angle), and changes the page (or angle) number.  
1
/
2
, or  
1 /12  
or  
ANGLE  
1 /1  
VCD1.1  
VCD2.0  
Items  
Function (Press  
/
to select desired item)  
Selection Method  
Track Number  
Shows the current track number, total number of tracks  
and PBC On mode, and skip to the desired track number.  
/
, or  
1 /4  
Numbers, ENTER  
Time  
Shows the elapsed playing time (Display only)  
0:20:09  
Audio Channel  
Shows the audio channel, and  
changes the audio channel.  
/
, or  
STER.  
AUDIO  
Sound  
Shows the current sound mode, and  
changes the setting.  
/
, or  
NORM.  
E.A.M.  
1-13  
 
Before Operation (Continued)  
Initial Settings  
Picture  
You can set your own Personal Preferences on the  
player.  
TV Aspect  
DVD-V  
DVD-A  
4:3 Letterbox: Select when a standard 4:3 TV is con-  
nected. Displays theatrical images with masking bars  
above and below the picture.  
Initial Settings General Operation  
4:3 Panscan: Select when a conventional TV set is  
connected. The video material formatted in the Pan &  
Scan style is played back in that style (Both sides of the  
picture are cut off).  
Press SETUP.  
The setup menu appears.  
1
Original  
English  
Disc Audio  
Disc Subtitle  
Disc Menu  
16:9 Wide: Select when a 16:9 wide TV is connected.  
French  
4:3 Letterbox  
4:3 Panscan  
16:9 Wide  
Disc Audio  
Disc Subtitle  
Disc Menu  
Rating  
German  
Spanish  
Italian  
Rating  
Area Code  
TV Aspect  
Chinese  
Polish  
Menu Language  
Progressive Scan  
Digital Audio Output  
5.1 Speaker Setup  
Others  
Area Code  
Hungarian  
Other — — — —  
TV Aspect  
Menu Language  
Progressive Scan  
Digital Audio Output  
5.1 Speaker Setup  
Others  
Press  
/
to select the desired item.  
2 The screen will show the current setting for the  
Progressive Scan  
DVD-V  
DVD-A  
selected item, as well as alternate setting(s).  
Progressive Scan Video provides the highest quality  
pictures with less flickering.  
If you are using the COMPONENT VIDEO OUT/  
PROGRESSIVE SCAN jacks, but are connecting the  
DVD Player to a standard (analog) television, set  
Progressive Scan to Off.  
If you are using the Component Video jacks for  
connection to a TV or monitor that is compatible with a  
progressive scan signal, set Progressive Scan to On.  
While the desired item is selected, press , then  
3
/
to select the desired setting.  
Press ENTER to confirm your selection.  
4 Some items require additional steps.  
Press SETUP, RETURN, or PLAY to exit the  
5 setup menu.  
Language  
Disc Language  
DVD-V  
DVD-A  
Off  
On  
Disc Audio  
Disc Subtitle  
Disc Menu  
Rating  
Select a language for the discs Menu, Audio, and Subtitle.  
Original : The original language set for the disc is selected.  
Other : To select another language, press number buttons to  
enter the corresponding 4-digit number according to the lan-  
guage code list on page 29. If you enter the wrong language  
code, press CLEAR.  
Area Code  
TV Aspect  
Menu Language  
Progressive Scan  
Digital Audio Output  
5.1 Speaker Setup  
Others  
Original  
English  
Disc Audio  
Disc Subtitle  
Disc Menu  
French  
German  
Spanish  
Italian  
Rating  
Area Code  
Note  
TV Aspect  
Chinese  
Polish  
Menu Language  
Progressive Scan  
Digital Audio Output  
5.1 Speaker Setup  
Others  
Progressive Scan will not be displayed in the setup menu  
when the rear switch is set at SCART position.  
Hungarian  
Other — — — —  
Caution  
Once the setting for progressive scan output is entered,  
an image will only be visible on a progressive scan  
compatible TV or monitor. If you set Progressive Scan  
to On in error, you must reset the unit.  
1) Remove any disc from the unit and close the disc  
tray. See that no discis displayed on the display  
window.  
2) Press STOP and hold it for five seconds before  
releasing it. The video output will be restored to the  
standard setting and a picture will once again be  
visible on a conventional analog TV or monitor.  
Menu Language  
Select a language for the setup menu. This is the menu  
you see when you press SETUP.  
English  
Spanish  
French  
Disc Audio  
Disc Subtitle  
Disc Menu  
Rating  
German  
Italian  
Area Code  
TV Aspect  
Menu Language  
Portuguese  
1-14  
 
Before Operation (Continued)  
Sound  
DVD-V  
DVD-A  
5.1 Speaker settings  
Select speaker settings, including volume balance and  
delay time, or test the speaker settings.  
Speaker settings are only active on the Analog Multi-  
Channel Output. (See Speaker Settings, page 27.)  
Digital Audio Output  
Each DVD disc has a variety of audio output options.  
Set the players Digital Audio Output according to the  
type of audio system you use.  
DOLBY DIGITAL/PCM: Select DOLBY DIGITAL/PCM”  
if you connected the DVD Players DIGITAL OUT jack to  
a Dolby Digital decoder (or an amplifier or other equip-  
ment with a Dolby Digital decoder).  
Disc Audio  
Disc Subtitle  
R
R
Disc Menu  
Rating  
Front L  
Volume  
Size  
Country Code  
0 dB  
Large  
1 ft  
Stream/PCM: Select Stream/PCMif you connected  
the DVD Players DIGITAL OUT jack to an amplifier or  
other equipment with a DTS decoder, Dolby Digital  
decoder or MPEG decoder.  
If you like to have DTS sounds from the digital output  
jack, you have to select Stream/PCM.  
TV Aspect  
Menu Language  
Distance  
Test  
Progressive Scan  
Digital Audio Output  
5.1 Speaker Setup  
Others  
Return  
PCM: Select when connected to a 2-channel digital  
stereo amplifier. The DVD player outputs sounds in the  
PCM 2ch format when you play a DVD video disc  
recorded on the Dolby Digital, MPEG1, or MPEG2  
recording system.  
DOLBY  
Disc Audio  
Disc Subtitle  
Disc Menu  
Rating  
DIGITAL /PCM  
Stream/PCM  
PCM  
Area Code  
Sample Freq.  
48 KHz  
TV Aspect  
Menu Language  
96KHz  
Progressive Scan  
Digital Audio Output  
5.1 Speaker Setup  
Others  
Sample Frequency  
To change the Sample Frequency setting, first select  
the desired Digital Audio Output as indicated as above.  
(1) If your receiver or amplifier is NOT capable of  
handling 96KHz signals, loud buzzing sounds might  
be heard. In this case, select 48 KHz.  
When this choice is made, this unit will automatically  
convert any 96KHz signals to 48KHz so your system  
can decode them.  
(2) If your receiver or amplifier is capable of handling  
96KHz signals, select 96KHz. When this choice is  
made, this unit will pass each type of signal through  
without any further processing.  
1-15  
 
Before Operation (Continued)  
Others  
DVD-V  
Pluge (Blacker than Black)  
For proper adjustment of your television brightness  
settings utilizing a commercially available test disc.  
On: Select when you adjust the level of your TV using a  
commercially available test disc that contains pluge signals.  
Off: For normal use.  
The DRC, Vocal, PBC, Auto Play, B.L.E., Pluge and  
DNR settings can be changed.  
z Press  
/
to select the desired item and press  
ENTER. The setting of the selected item is changed  
between On and Off.  
DNR (Digital Noise Reduction)  
Disc Audio  
Disc Subtitle  
Disc Menu  
Rating  
DRC  
On  
On  
On  
Off  
Off  
Off  
Off  
VCD2.0 VCD1.1  
DVD-V  
Vocal  
PBC  
You can reduce ambient noise in the picture.  
DNR1: Normal level  
DNR2: Expanded level.  
Off: Off.  
Auto Play  
Area Code  
B.L.E.  
TV Aspect  
Pluge  
DNR  
Menu Language  
Progressive Scan  
Digital Audio Output  
5.1 Speaker Setup  
Others  
Notes  
Actual picture enhancement may vary depending on the  
quality of the disc.  
While the DNR2 (expanded level) can provide additional  
improvement in the reduction of noise in the video signal, it  
may produce undesirable picture artifacts on some discs.  
Should this occur, select a more appropriate DNR level (nor-  
mal or off).  
Depending on the disc, some picture detail may be lost by  
the picture enhancement.  
A DVD audio disc with Dolby Digital or DTS soundtrack may  
be played, some DVD audio discs include moving pictures  
which may be modified by the above processes.  
Dynamic Range Control (DRC)  
DVD-V  
With the DVD format, you can hear a programs sound-  
track in the most accurate and realistic presentation  
possible, thanks to digital audio technology. However,  
you may wish to compress the dynamic range of the  
audio output (the difference between the loudest sounds  
and the quietest ones). Then, you may listen to a movie  
at a lower volume without losing clarity of sound. Set  
DRC to On for this effect.  
Vocal  
DVD-V  
Set Vocal to On only when a multi-channel karaoke  
DVD is playing. The karaoke channels on the disc will  
mix into normal stereo sound.  
VCD2.0  
VCD1.1  
PBC  
Set Playback Control (PBC) to On or Off.  
On: Video CDs with PBC are played according to the PBC.  
Off: Video CDs with PBC are played the same way as Audio CDs.  
Auto Play  
DVD-V  
You can set up the DVD Player so a DVD disc automat-  
ically starts playing whenever the DVD is inserted.  
If Auto Play mode is set to On, this DVD player will  
search a title where playback time is longest and then  
play back the title automatically.  
On: Auto Play function is activated.  
Off: Auto Play function is not activated.  
Note  
The Auto Play function may not work for some DVDs.  
VCD2.0  
VCD1.1  
B.L.E. (Black Level Expansion) DVD-V  
To select the black level of playback pictures. Set your  
preference and monitors ability.  
On: Expanded grey scale. (0 IRE cut off)  
Off: Standard grey scale. (7.5 IRE cut off)  
1-16  
 
Before Operation (Continued)  
Parental Control  
DVD-V  
Area Code  
Enter the code of a country/area whose standards were  
used to rate the DVD video disc, referring to the list  
(See Area Code List, page 30.).  
Rating  
DVD-V  
Movies on DVDs may contain scenes not suitable for  
children. Therefore, discs may contain Parental Control  
information that applies to the complete disc or to  
certain scenes on the disc. These scenes are rated  
from 1 to 8, and alternatively, more suitable scenes are  
available for selection on some discs. Ratings are  
country-dependent. The Parental Control feature allows  
you to prevent discs from being played by your children  
or to have certain discs played with alternative scenes.  
Disc Audio  
Code Set  
Disc Subtitle  
Disc Menu  
D
E
Rating  
Area Code  
TV Aspect  
Menu Language  
Progressive Scan  
Digital Audio Output  
5.1 Speaker Setup  
Others  
8
Disc Audio  
7
Disc Subtitle  
6
Disc Menu  
Select Area Code using the  
setup menu.  
/
buttons on the  
5
Rating  
4
1
Area Code  
3
TV Aspect  
While Area Code is selected, press  
Follow step 3 of Ratingon left.  
Select the first character using the  
.
2
Menu Language  
Progressive Scan  
Digital Audio Output  
5.1 Speaker Setup  
Others  
2
3
4
1
Unlock  
Change  
/
buttons.  
Select Ratingon the Setup menu using the  
1
2
/
buttons.  
Shift the cursor using button and select the  
5 second character using  
/
buttons.  
While Ratingis selected, press  
.
Press ENTER to confirm your area code selec-  
6 tion, then press SETUP to exit the menu.  
When you have not entered a password yet.  
3 Enter a 4-digit password using the numbered but-  
tons to create a personal 4-digit security password,  
then press ENTER. Enter the 4-digit password  
again and press ENTER to verify.  
Note  
Confirmation of the 4-digit password is necessary when  
the code is changed (see Changing the 4-digit code”  
below.).  
When you have already entered a password;  
Enter a 4-digit password using the numbered but-  
tons to confirm the personal 4-digit security pass-  
word, then press ENTER.  
Changing the 4-digit code  
1 Follow Steps 1-2 as shown above to the left (Rating).  
2 Enter the old code, then press ENTER.  
If you make a mistake before pressing ENTER, press  
CLEAR and enter 4-digit security password again.  
3 Select Change using  
/
buttons then press  
ENTER.  
Select a rating from 1 to 8 using the  
/
but-  
4 Enter the new 4-digit code, then press ENTER.  
5 Enter exactly the same code a second time and veri-  
fy by pressing ENTER.  
4 tons.  
Level 1: DVD software for adults cannot be  
played back.  
6 Press SETUP to exit the menu.  
Level 8: All DVD software can be played back.  
Unlock: If you select Unlock, Parental Control is  
not active. The disc will play in full.  
If you forget your 4-digit code  
Ratings 1 to 8: Some discs contain scenes not  
suitable for children. If you set a rating for the play-  
er, all disc scenes with the same rating or lower will  
be played. Higher rated scenes will not be played  
unless an alternative scene is available on the disc.  
The alternative must have the same rating or a  
lower one. If no suitable alternative is found, play-  
back will stop. You must enter the 4-digit password  
or change the rating level in order to play the disc.  
If you forget your password, to clear the current pass-  
word, follow the procedure below.  
1 Press SETUP to display the setup menu.  
2 Use the Number buttons to enter the 6-digit number  
210499.  
The 4-digit password is cleared. P CLrappears on the  
display for a moment.  
3
Enter a new code as shown above to the left (Rating).  
Press ENTER to confirm your rating selection,  
5 then press SETUP to exit the menu.  
1-17  
 
Operation with DVD and Video CD  
Playing a DVD and Video CD  
General Features  
VCD2.0  
VCD1.1  
Playback Setup  
DVD-V  
DVD-A  
Note  
Unless stated otherwise, all operations described use  
the remote control. Some features may also be  
available on the Setup menu.  
z Turn on the TV and select the video input source con-  
nected to the DVD player.  
z Audio system: Turn on the audio system and select  
the input source connected to the DVD player.  
Moving to another TITLE/GROUP  
Press OPEN/CLOSE to open the disc tray.  
1 /3  
2 /6  
DVD-V  
DVD-A  
1
When a disc has more than one title/group, you can  
move to another title/group as follows:  
z Press DISPLAY, then press the appropriate num-  
bered button (0-9) to select a title/group number.  
Load your chosen disc in the tray, with the  
2 playback side down.  
Press OPEN/CLOSE to close the tray.  
3 READING appears on the TV screen, and playback  
starts automatically. If playback does not start,  
press PLAY.  
Moving to another CHAPTER/TRACK  
VCD1.1  
VCD2.0  
DVD-V  
DVD-A  
In some cases, the disc menu might appear  
instead.  
1 /12  
1 /12  
1 /12  
If a menu screen is displayed  
The menu screen may be displayed first after loading a  
DVD or Video CD which offer a menu.  
When a title on a disc has more than one chapter or a  
disc has more than one track, you can move to another  
chapter/track as follows:  
z Press SKIP  
playback to select the next chapter/track or to return  
to the beginning of the current chapter/track.  
z Press SKIP  
back to the previous chapter/track.  
or  
briefly during  
DVD-V  
Use the 3/4/1/2buttons to select the title/chapter you  
want to view, then press ENTER to start playback.  
Press TOP MENU or MENU to return to the menu  
screen.  
twice in quick successions to step  
z To go directly to any chapter/track during DVD play-  
back, press DISPLAY. Then, press  
chapter/track icon. Then, enter the chapter/track  
number using the numbered buttons (0-9).  
/
to select the  
DVD-A  
Use the 3/4/1/2 buttons to select an option you want,  
then press ENTER to view the option.  
VCD2.0  
Note  
For two-digit numbers, press the numbered buttons  
(0-9) in rapid succession.  
z Use the number buttons to select the track you want  
to view.  
Press RETURN to return to the menu screen.  
z Menu setting and the exact operating procedures for  
using the menu may differ depending on the disc.  
Follow the instructions on each menu screen.  
You also may set PBC to Off under setup. See page  
16.  
VCD2.0  
VCD1.1  
DVD-V  
DVD-A  
Search  
1 Press REV  
or FWD  
during playback.  
The player will now go into SEARCH mode.  
2 Press REV  
required speed:  
(backward) or  
(forward).  
or FWD  
X2,  
X2,  
repeatedly to select the  
X4, X16, X100  
X4, X16, X100  
Notes  
With a Video CD, the Search speed changes:  
X2,  
X8,  
If Parental Control is set and the disc is not within the  
Rating settings (not authorized), the 4-digit code must  
be entered and/or the disc must be authorized (see  
Parental Control, on page 17).  
X4,  
(forward).  
X8, (backward) or  
X2,  
X4,  
3 To exit SEARCH mode, press PLAY.  
DVDs may have a region code.  
Note  
Your player will not play discs that have a region code  
different from your player. The region code for this  
player is 2 (two).  
When using a DVD audio disc that includes pictures,  
this operation may be permitted in some picture  
segments.  
VCD2.0  
VCD1.1  
Pause  
DVD-V  
DVD-A  
1 Press PAUSE/STEP during playback.  
2 To return to playback, press PLAY.  
1-18  
 
Operation with DVD and Video CD  
VCD2.0  
VCD1.1  
Repeat  
DVD-V  
DVD-A  
General Features (continued)  
GROUP  
TITLE  
TRACK  
CHAPT  
ALL  
OFF  
Still Picture and Frame-by-Frame playback  
DVD Video Discs - Repeat Chapter/Title/Off  
VCD2.0  
VCD1.1  
DVD-V  
DVD-A  
1
To repeat the currently playing chapter, press REPEAT.  
The Repeat Chapter icon appears on the TV screen.  
1 Press PAUSE/STEP during playback.  
The player will now go into PAUSE mode.  
2 You can advance the picture frame-by-frame by  
pressing PAUSE/STEP repeatedly on the remote con-  
trol.  
2 To repeat the title currently playing, press REPEAT a  
second time.  
The Repeat Title icon appears on the TV screen.  
3 To exit Repeat mode, press REPEAT a third time.  
The Repeat Off icon appears on the TV screen.  
Note  
When using a DVD audio disc that includes pictures, this  
operation may be permitted in some picture segments.  
DVD Audio Discs - Repeat Track/Group/Off  
1 To repeat the currently playing track, press REPEAT.  
The Repeat Track icon appears on the TV screen.  
VCD2.0  
VCD1.1  
DVD-V  
DVD-A  
Slow Motion  
1 Press SLOW  
The player will enter SLOW mode.  
2 Use the SLOW  
2 To repeat the group currently playing, press REPEAT  
a second time.  
The Repeat Group icon appears on the TV screen.  
or  
during playback.  
or  
1/4 or  
1/4 or  
to select the required speed:  
3 To exit Repeat mode, press REPEAT a third time.  
The Repeat Off icon appears on the TV screen.  
1/16,  
1/8,  
1/2 (backward), or  
1/2 (forward).  
1/16,  
1/8,  
3 To exit slow motion mode, press PLAY.  
Video CDs - Repeat Track/All/Off  
1 To repeat the track currently playing, press REPEAT.  
Notes  
The Repeat Track icon appears on the TV screen.  
z Slow motion playback in reverse is not applicable for  
Video CD.  
2 To repeat the disc currently playing, press REPEAT a  
second time.  
The Repeat All icon appears on the TV screen.  
z
When using a DVD audio disc that includes pictures, this  
operation may be permitted in some picture segments.  
3 To exit Repeat mode, press REPEAT a third time.  
The Repeat Off icon appears on the TV screen.  
VCD2.0  
VCD1.1  
Random Karaoke DVD  
1 Press RANDOM during playback or in stop mode.  
The unit automatically begins Random Playback and  
RANDOMappears on the display window.  
Note  
On a Video CD with PBC, you must set PBC to Off on the  
setup menu to use the Repeat function. See page 16.  
2 To return to normal playback, press RANDOM until  
RANDOMdisappears on the display window.  
0:20:09  
-:--:--  
Tip  
DVD-V  
Time Search  
By pressing SKIP  
during Random playback, the  
unit selects another title (track) and resumes Random  
playback.  
The Time Search function allows you to start playing at  
any desired time on the disc.  
1 Press DISPLAY during playback. The on-screen dis-  
Notes  
play appears on the screen.  
The Time Search box shows the elapsed playing time of the  
current disc.  
z This function only works with DVD Karaoke discs and  
video CD without PBC.  
z On a Video CD with PBC, you must set PBC to Off on  
the setup menu to use the Random function. See  
page 16.  
2 Within 10 seconds, press  
Search icon in the on-screen display.  
The -:--:--appears in the Time Search box.  
/
to select the Time  
3 Within 10 seconds, use the number buttons to enter  
the required start time. Enter hours, minutes, and sec-  
VCD2.0  
VCD1.1  
DVD-V  
DVD-A  
Repeat A-B  
onds from left to right in the box.  
A
*
A
B
OFF  
If you enter the wrong numbers, press CLEAR to remove the  
To repeat a sequence in a title or group:  
numbers you entered. Then enter the correct numbers.  
4 Within 10 seconds, press ENTER to confirm the start  
1 Press A-B RPT at your desired starting point.  
A * appears briefly on the TV screen.  
time.  
Playback starts from the selected time on the disc. If you enter  
an invalid time, playback will continue from the current point.  
2 Press A-B RPT again at your desired end point.  
A Bappears briefly on the TV screen, and the repeat  
sequence begins (A  
sBappears on the display window).  
3 To cancel the sequence, press A-B RPT.  
1-19  
 
Operation with DVD and Video CD  
General Features (continued)  
2 Press  
/
to select the Marker number that you  
want to erase.  
3 Press CLEAR.  
Selecting the sound enhancement  
The Marker number will be erased from the list.  
NORM.  
4 Repeat steps 2 and 3 to erase additional Marker  
3D SUR  
DIALOGUE  
VCD2.0  
VCD1.1  
DVD-V  
numbers.  
5 To remove the MARKER SEARCH menu, press  
Press E.A.M. to select the sound enhancement during  
playback.  
SEARCH.  
NORM. : Normal sound  
DVD-V  
DVD-A  
Special DVD Features  
3D SUR: This player can produce a 3D Surround effect, which  
simulates multi-channel audio playback from two conventional  
stereo speakers, instead of the five or more speakers normally  
required to listen to multi-channel audio from a home theater  
system.  
DIALOGUE: Enhances critical center channel information to  
make dialogue more intelligible (only when playing a DVD  
video disc recorded on the Dolby Digital recording system).  
To use this enhancement on audio output from the  
DIGITAL AUDIO OUT jack, be sure to set Digital Audio  
Checking the contents of DVD Video  
discs: Menus  
DVDs may offer menus that allow you to access special  
features. To use the disc menu, press MENU. Then,  
press the appropriate number button to select an option.  
Or, use the 3/4/1/2 buttons to highlight your selection,  
then press ENTER.  
Outputto PCM. See page 15.  
DVD-V  
DVD-A  
Title Menu  
VCD2.0  
VCD1.1  
DVD-V  
DVD-A  
1 Press TOP MENU.  
Zoom  
If the current title has a menu, the menu will appear on the  
screen. Otherwise, the disc menu may appear.  
The Zoom function allows you to enlarge the video  
image and to move through the enlarged image.  
2 The menu can list camera angles, spoken language  
and subtitle options, and chapters for the title.  
1 Press ZOOM during playback or still playback to acti-  
vate the Zoom function.  
If you press ZOOM repeatedly, the magnification level  
increases up to six steps.  
3 To remove the title menu, press TOP MENU again.  
2 Use the 3/4/1/2 buttons to move through the  
zoomed picture.  
DVD-V  
DVD-A  
Disc Menu  
1 Press MENU.  
The disc menu is displayed.  
3 Press CLEAR to resume normal playback or return to  
the paused image.  
2 To remove the disc menu, press MENU again.  
Note  
1 /1  
DVD-V  
DVD-A  
Camera Angle  
The zoom function may not work for some DVD-V and  
DVD-A.  
If the disc contains scenes recorded at different camera  
angles, you can change to a different camera angle  
during playback.  
VCD2.0  
VCD1.1  
DVD-V  
Marker Search  
z Press ANGLE repeatedly during playback to select a  
desired angle.  
MARKER SEARCH  
1/9  
The number of the current angle appears on the display.  
You can start playback from a memorized point. Up to  
nine points can be memorized.  
To enter a mark, follow these steps.  
Changing the Audio Language  
1
1 ENG  
D
5.1 CH  
PPCM  
5.1 CH  
DVD-V  
DVD-A  
1 During disc playback, press MARKER when  
playback reaches the spot that you want to  
memorize.  
Press AUDIO repeatedly during playback to hear a dif-  
ferent audio language or audio track.  
The Marker icon will appear on the TV screen briefly.  
2 Repeat step 1 to enter up to nine Marker points on a  
Changing the Audio Channel  
disc.  
To Recall a Marked Scene  
1 During disc playback, press SEARCH.  
The MARKER SEARCH menu will appear on the screen.  
STER.  
LEFT  
RIGHT  
VCD2.0  
VCD1.1  
Press AUDIO repeatedly during playback to hear a dif-  
ferent audio channel (STER., LEFT or RIGHT).  
2 Within 10 seconds, press  
/
to select a Marker  
number that you want to recall.  
3 Press ENTER.  
Playback will start from the Marked scene.  
1 ENG  
DVD-V  
DVD-A  
Subtitles  
4 To remove the MARKER SEARCH menu, press  
SEARCH.  
To clear a Marked Scene  
Press SUBTITLE repeatedly during playback to see the  
different subtitle languages.  
Note  
1 During disc playback, press SEARCH.  
The MARKER SEARCH menu will appear on the screen.  
If  
appears, the feature is not available on the disc.  
1-20  
 
Operation with DVD and Video CD  
DVD-A  
DVD Audio Discs  
1 /12  
Viewing another PAGE  
DVD-A  
Since DVD Audio discs can hold a lot of content, there  
are various ways to see whats available on the disc.  
1 Press DISPLAY during playback.  
DVD Audio is a new disc format building on the success  
of DVD to provide high quality, uncompressed, multi-  
channel audio for a new experience in audio quality. A  
DVD Audio disc can be identified by the DVD audio logo  
on the disc jacket or on the disc itself.  
2 Press 3/4 to select Page icon.  
3 Press 1/2 to select a page number.  
What appears on the screen will vary from disc to disc  
because the information available depends upon the way the  
disc was created.  
DVD Audio can provide higher quality stereo than Audio  
CDs with a sampling rate of up to 192kHz (compared to  
44.1kHz for CDs). DVD Audio digital sound can be  
delivered with up to 24 bits of data (compared to 16 bits  
for a standard CD).  
Note  
Since the authoring of DVD Audio Discs varies, some of  
the on-screen display choices might not be available for  
the disc youre playing.  
A typical DVD Audio disc contains up to seven times the  
data capacity of a CD. This additional space is used for  
music, either Advanced Resolution multi-channel sound  
quality that is closer to the artists master recording or  
for longer recordings. Many DVD Audio discs contain  
on-screen text, such as artist biographies, playlists, or  
lyrics. Some DVD Audio discs contain photo galleries or  
video clips.  
Note  
To enjoy maximum sound quality and surround effect of  
DVD Audio, you must use 5.1 channel analog audio output  
(5.1CH AUDIO OUT jacks on the DVD Player). If you use  
the DIGITAL OUT (OPTICAL or COAXIAL) for your audio  
connection, the sound will only be similar to CD-quality  
sound even though youre playing a DVD Audio disc and  
might not have surround effect.  
2 /6  
Moving to another GROUP  
DVD-A  
Some DVD Audio discs divide content into different  
groups. Your player enables you to quickly access  
different groups during playback via the on-screen  
display.  
1 Press DISPLAY during playback or in stop mode.  
2 Press 3/4 to select Group icon.  
3 Press 1/2 or the numbered buttons (0-9) to select a  
group number.  
Note  
Sometimes the author of the disc creates hidden con-  
tent that can only be accessed by entering a password.  
If the lock icon appears on the TV screen, enter the  
password (sometimes youll find it on the discs jacket  
cover or on a web site). This password control isnt dic-  
tated by your DVD Player it is a function of the disc.  
Since the authoring of DVD Audio Discs varies, some of  
the on-screen display choices might not be available for  
the disc youre playing.  
1-21  
 
Operation with Audio CD and MP3/WMA Disc  
Notes on MP3/WMA Recordings  
Playing an Audio CD and MP3/WMA Disc  
About MP3  
CD  
MP3  
WMA  
z An MP3 file is audio data compressed by using the  
MPEG1 audio layer-3 file-coding scheme. We call  
files that have the .mp3file extension MP3 files.  
z The player can not read an MP3 file that has a file  
extension other than .mp3.  
The DVD Player can play MP3/WMA formatted record-  
ings on CD-ROM, CD-R or CD-RW discs.  
Before playing MP3/WMA recordings, read the notes on  
MP3/WMA Recordings on right.  
Insert a disc and close the tray.  
Audio CD; Audio CD menu appears on the TV  
About WMA(Window Media Audio)  
1
screen go to step 4.  
MP3/WMA disc; The MP3/WMA-JPEG choice  
menu appears on the TV screen. Go to step 2  
z An WMA file is a Microsoft audio compression  
technology.  
z WMA(Windows Media Audio) offers double the audio  
compression of the MP3 format.  
MP3 WMA  
JPEG  
MP3/WMA Disc compatibility with this player is  
limited as follows:  
1. Sampling Frequency / only at 44.1kHz (MP3),  
Press  
/
to select the MP3/WMA then press  
2 ENTER.  
22.05 - 44.1kHz (WMA)  
2. Bit rate / within 32 - 320kbps (MP3),  
32 - 128kbps (WMA)  
The MP3/WMA menu appears on the TV screen.  
Press RETURN to move to the MP3/WMA-JPEG  
choice menu.  
3. CD-R physical format should be ISO 9660”  
4. If you record MP3/WMA files using the software  
which cannot create a FILE SYSTEM, for example  
Direct-CDetc., it is impossible to playback  
MP3/WMA files. We recommend that you use Easy  
CD Creator, which creates an ISO9660 file system.  
5. A single session disc requires MP3/WMA files in the  
first track. If there is no MP3/WMA file in the 1st  
track, it cannot playback MP3/WMA files. If you wish  
to playback MP3/WMA files, format all the data in  
the disc or use a new one.  
Program  
MP3 WMA  
TRACK 1.mp3  
TRACK 2.mp3  
TRACK 3.mp3  
TRACK 4.mp3  
TRACK 5.mp3  
TRACK 6.mp3  
TRACK 7.mp3  
TRACK 8.mp3  
Clear All  
OFF  
00:00  
1
Press  
/
to select a folder, and ENTER.  
3 A list of files in the folder appears.  
6. File names should be named using 8 letters or less  
and must incorporate .mp3or .wmaextension  
e.g. ********.MP3or ********.WMA.  
7. Do not use special letters such as / : * ? < > etc.  
8. Total number of files on the disc should be less than  
650.  
Press  
/
to select a track then press PLAY or  
4 ENTER.  
Playback starts.  
During playback, the current tracks elapsed playing  
time will appear on the display window and menu.  
Playback will stop at the end of the disc.  
Press TOP MENU to move to the next page.  
Press MENU to move to the previous page.  
This DVD player requires discs/recordings to meet  
certain technical standards in order to achieve optimal  
playback quality. Pre-recorded DVDs are automatically  
set to these standards. There are many different types  
of recordable disc formats (including CD-R containing  
MP3 or WMA files). That require certain pre-existing  
conditions (see above) to insure compatible playback.  
Program  
MP3 WMA  
Program  
CD  
TRACK01  
TRACK 1.mp3  
TRACK02  
TRACK03  
TRACK04  
TRACK05  
TRACK06  
TRACK07  
TRACK08  
TRACK 2.mp3  
TRACK 3.mp3  
TRACK 4.mp3  
TRACK 5.mp3  
TRACK 6.mp3  
TRACK 7.mp3  
TRACK 8.mp3  
Clear All  
OFF  
Clear All  
NORM.  
00:00  
1
0: 56: 18  
STER.  
Customers should also note that permission is  
required in order to download MP3/WMA files and  
music from the Internet. Our company has no right  
to grant such permission. Permission should  
always be sought from the copyright owner.  
Audio CD menu  
MP3/WMA menu  
Tips  
If you are in a file list and want to return to the Folder  
list, use the to highlight and press ENTER to  
/
Microsoft, Windows Media, and the  
Windows Logo are trademarks or  
registered trademarks of Microsoft  
Corporation in both the United States  
and other countries  
return to the previous menu screen.  
To stop playback at any other time, press STOP.  
5
1-22  
 
Operation with Audio CD and MP3/WMA Disc (Continued)  
CD  
MP3  
WMA  
CD  
Pause  
Repeat A-B  
1 Press PAUSE/STEP during playback.  
To repeat a sequence.  
2 To return to playback, press PLAY or press  
1 During disc playback, press A-B RPT at your desired  
PAUSE/STEP again.  
starting point.  
The Repeat icon and * appears on the menu screen.  
A
2 Press A-B RPT again at your desired end point.  
The Repeat icon and A Bappears on the menu screen,  
and the sequence begins to play repeatedly.  
CD  
MP3  
Moving to another Track  
WMA  
3 To exit the sequence and return to normal play, press  
A-B RPT again.  
The Repeat icon and OFFappears on the menu screen.  
z Press SKIP  
playback to go to the next track or to return to the  
beginning of the current track.  
or  
briefly during  
z Press SKIP  
back to the previous track.  
twice in quick successions to step  
Selecting the sound enhancement  
CD  
z In case of audio CD, to go directly to any track, enter  
the track number using the numbered buttons (0-9)  
during playback.  
This unit can produce a 3D Surround effect, which  
simulates multi-channel audio playback from two  
conventional stereo speakers, instead of the five or  
more speakers normally required to listen to multi-  
channel audio from a home theater system.  
CD  
MP3  
WMA  
Repeat Track/All/Off  
1 To repeat the track currently playing, press REPEAT.  
The Repeat icon and TRACKappears on the menu  
screen.  
1 Press E.A.M. to select 3D SURduring playback.  
2 To turn off the 3D Surround effect, press E.A.M. again  
to select NORM..  
2 To repeat all tracks on a disc, press REPEAT a sec-  
ond time.  
The Repeat icon and ALLappears on the menu screen.  
CD  
Changing the Audio Channel  
3 To cancel Repeat mode, press REPEAT a third time.  
The Repeat icon and OFFappears on the menu screen.  
Press AUDIO repeatedly during playback to hear a  
different audio channel (STER., LEFT, or RIGHT).  
CD  
MP3  
WMA  
Search  
1 Press REV  
or FWD  
during playback.  
The player will now go into SEARCH mode.  
2 Press REV  
required speed:  
or FWD  
X2,  
repeatedly to select the  
X4, X8 (backward) or  
X2,  
X4,  
X8 (forward).  
Search speed and direction are indicated on the menu  
screen.  
3 To exit SEARCH mode, press PLAY.  
CD  
MP3  
WMA  
Random  
1 Press RANDOM during playback or when playback is  
stopped.  
The unit automatically begins Random Playback and  
RANDOM or RAND.appears on the display window  
and menu screen.  
2 To return to normal playback, press RANDOM repeat-  
edly until RANDOM or RAND.disappears on the  
display window and menu screen.  
1-23  
 
Operation with JPEG Disc  
use, and press ENTER.  
JPEG  
Viewing a JPEG disc  
To stop viewing at any other time, press STOP.  
This DVD Player can play discs with JPEG files. Before  
playing JPEG recordings, read the notes on JPEG  
Recordings on right.  
5 The JPEG menu appears.  
Insert a disc and close the tray.  
The MP3/WMA-JPEG choice menu appears on the  
TV screen.  
Moving to another File  
1
Press SKIP  
or  
once during viewing a picture  
to advance to the next file or to the previous file.  
MP3 WMA  
JPEG  
Still Picture  
1 Press PAUSE/STEP during slide show.  
The player will now go into PAUSE mode.  
2 To return to the slide show, press PLAY or press  
PAUSE/STEP again.  
Note  
No MP3/WMA-JPEG choice menu willl be displayed for  
Kodak PICTURE CD. The JPEG menu will appear on  
the TV screen.  
To flip the picture  
JPEG  
Press  
/
during showing a picture to flip the  
Folder1  
Folder2  
Folder3  
Folder4  
Folder5  
Folder6  
Folder7  
Folder8  
picture horizontally or a vertically.  
To rotate picture  
Off  
Slide Speed  
Press  
/
during showing a picture to rotate the  
picture clockwise or counter clockwise.  
Press  
/
to select the JPEG then press  
2 ENTER.  
The JPEG menu appears on the TV screen.  
Notes on JPEG Recordings  
Press  
/
to select a folder, and ENTER.  
z Depending upon the size and number of the JPEG  
files, it could take a long time for the DVD player to  
read the discs contents. If you dont see an on-  
screen display after several minutes, some of the files  
are too big reduce the resolution of the JPEG files  
to less than 2 mega pixels and burn another disc.  
3 A list of files in the folder appears.  
Press RETURN to move to the MP3/WMA-JPEG  
choice menu.  
Tip  
If you are in a file list and want to return to the Folder list,  
z Total number of files and folders on the disc should  
be less than 650.  
use the  
/
buttons on the remote to highlight “  
and  
press ENTER to return to the previous menu screen.  
z Some disc may be incompatible due to different  
If you want to view a particular file, press  
4 highlight a file and press ENTER or PLAY.  
Viewing the file proceeding starts.  
/
to  
recording format or condition of disc.  
z When you are using software such as Easy CD  
Creatorto burn the jpeg files into the CD-R, ensure  
that all the selected files have the .jpgextensions  
when copying into the CD layout.  
During viewing a file, press RETURN to move to  
the previous menu (JPEG menu).  
Press TOP MENU to move to the next page.  
Press MENU to move to the previous page.  
z If the files have .jpeor .jpegextensions, please  
rename them as .jpgfiles.  
z File names without .jpgextension will not be able to  
be read by this DVD player. Even though the files are  
shown as JPEG image files in windows explorer.  
Folder1  
JPEG  
Picture1.jpg  
Picture2.jpg  
Picture3.jpg  
Picture4.jpg  
Picture5.jpg  
Picture6.jpg  
Picture7.jpg  
Off  
5/32  
1024X768  
Slide Speed  
5/32  
1024X768 Picture5.jpg  
Tip  
There are three viewing Slide Speed options: Fast,  
Normal, Slow, and Off. Press to highlight the Slide  
Speed then press to select the option you want to  
/
/
1-24  
 
VCD2.0  
VCD1.1  
CD  
MP3  
WMA  
Programmed Playback  
Programmed Playback with Audio CD  
and MP3/WMA Disc  
The Program function enables you to store your favorite  
tracks from any disc in the player memory.  
Programmed Playback with Video CD  
Note  
On a Video CD with PBC, you must set PBC to Off on the  
setup menu to use the Program function. See page 16.  
Program can contain 30 tracks.  
Insert Video CD and close the tray.  
1
2
Press PROGRAM during playback or in the stop  
mode to enter the Program Edit mode.  
1
Press PROGRAM while playback is stopped.  
The VCD Program menu will appear.  
E
The  
mark will appear to the right of the word Program  
on the right side of the menu screen.  
Program  
E
VCD  
TRACK 1  
TRACK 2  
TRACK 3  
TRACK 4  
TRACK 5  
TRACK 6  
TRACK 7  
TRACK 8  
Note  
Press PROGRAM to exit the Program Edit mode;  
E
the  
mark will disappear.  
Clear All  
Select a track, then press ENTER to place the  
2 selected track on the Program list.  
Note  
Repeat step 2 to place additional tracks on the  
Press RETURN or PROGRAM to exit the Program menu.  
3 Program list.  
Follow steps 2-6 of Programmed Playback with  
E
Program  
TRACK 8.mp3  
E
MP3 WMA  
Program  
CD  
3 Audio CD and MP3/WMA discon left.  
TRACK 1  
TRACK 12  
TRACK 8  
TRACK 10  
TRACK 3  
TRACK 1.mp3  
TRACK 2.mp3  
TRACK 4.mp3  
TRACK 3.mp3  
TRACK 2  
TRACK 3  
TRACK 4  
TRACK 5  
TRACK 6  
TRACK 7  
TRACK 8  
TRACK 2.mp3  
TRACK 3.mp3  
TRACK 4.mp3  
TRACK 5.mp3  
TRACK 6.mp3  
TRACK 7.mp3  
TRACK 8.mp3  
To resume normal playback from programmed  
4 playback, press PROGRAM.  
Clear All  
OFF  
Clear All  
NORM.  
PROG.indicator disappears in the display window.  
00:00  
3
0: 56: 18  
STER.  
Repeat Programmed Tracks  
Audio CD menu  
MP3/WMA menu  
z To repeat the track currently playing, press REPEAT.  
The Repeat icon and TRACKappears on the menu  
screen.  
Press  
.
The programmed track you selected last is highlighted on  
the program list.  
4
z To repeat all tracks on the program list, press  
REPEAT a second time.  
Press  
/
to select the track you want to start  
The Repeat icon and ALLappears on the menu screen.  
z To cancel Repeat mode, press REPEAT a third time.  
The Repeat icon and OFFappears on the menu screen.  
5 playing.  
Press TOP MENU to move to the next page.  
Press MENU to move to the previous page.  
Press PLAY to start.  
Erasing a Track from Program List  
Playback begins in the order in which you programmed  
the tracks and PROG.appears on both the menu screen  
and display window.  
6
7
1 Press PROGRAM during playback (Audio CD and  
MP3/WMA disc only) or in the stop mode to enter the  
Playback stops after all of the tracks on the Program list  
have played once.  
Program Edit mode.  
E
The  
mark will appear.  
To resume normal playback from programmed  
playback, press PROGRAM. Select a track of CD  
(or MP3/WMA) list and then press ENTER.  
PROG.indicator disappears from the menu screen and  
display window.  
2 Press to move to the Program list.  
3 Use to select the track that you wish to erase  
/
from the Program list.  
4 Press CLEAR.  
The track will be erased from the Program list.  
Erasing the Complete Program List  
1 Follow steps 1-2 of Erasing a Track from Program  
Listas above.  
2 Use  
/
to select Clear All, then press ENTER.  
The complete Program for the disc will be erased.  
The programs are also cleared when the disc is removed.  
1-25  
 
Additional Information  
Screen Saver  
Video Mode Setting  
VCD2.0  
VCD1.1  
DVD-V  
DVD-A  
The screen saver picture appears when you leave the  
DVD Player in stop mode for about five minutes.  
z With certain discs, the playback picture may be flick-  
ering or Dot Crawl is shown on straight lines. That  
means Vertical interpolation or De-interlace is not  
perfectly matched with the disc. In this case, the  
picture quality may be improved by changing the  
video mode.  
After the Screen Saver has been engaged for about five  
minutes, the DVD Player will automatically turn itself off.  
Dimmer Function  
You can adjust the Display Windows brightness in  
3 steps. Each press of the FL DIM button changes the  
Display Windows brightness in the following order:  
z To change the video mode, press and hold  
DISPLAY about 3 seconds during disc playback. The  
new video mode number selected is displayed on the  
TV screen. Check whether the video quality has  
improved. If not, repeat the above procedure until pic-  
ture quality is improved.  
Normal Dim Display Off  
System Select  
z Video mode sequence:  
You must select the appropriate system mode for your  
TV system. If NO DISC appears in the display window,  
press and hold PAUSE on the front panel for more than  
5 seconds to be able to select a system (PAL, NTSC,  
or AUTO).  
When the selected system does not coincide with the  
system of your TV, normal color picture may not be  
displayed.  
Auto  
Film Video Auto  
z If you turn off the power, the video mode will return to  
initial default state (Auto).  
Detailed Description of each Video Mode  
Auto : The source material of the DVD video (film material or  
video material) is determined from disc information.  
Film : Suitable for playing film based content or video based  
material recorded by the progressive scan method.  
Video : Suitable for playing video based content with  
comparatively little motion.  
AUTO: Select when DVD player is connected with  
Multi system TV.  
NTSC: Select when DVD player is connected with  
NTSC-TV.  
PAL:  
Select when DVD player is connected with  
PAL-TV.  
Note  
The video mode setting only works when the  
Progressive Scan mode is set to Onon the setup  
menu.  
1-26  
 
Speaker Settings  
Make the following settings for the built-in 5.1 channel  
surround decoder.  
Distance  
If you connected speakers to your DVD Player, setting  
the Distance lets the speakers know how far the sound  
has to travel to reach your set listening point. This  
allows the sound from each speaker to reach the  
listener at the same time. (1 ft = 30.48 cm)  
Disc Audio  
Disc Subtitle  
R
R
Disc Menu  
Rating  
Front L  
Volume  
Size  
Country Code  
0 dB  
Large  
1 ft  
TV Aspect  
Menu Language  
Distance  
Test  
Note  
Progressive Scan  
Digital Audio Output  
5.1 Speaker Setup  
Others  
You cannot set the distance of subwoofer speaker.  
Return  
Test  
Press ENTER to test the signals of each speaker.  
Adjust the volume to match the volume of test signals  
memorized in the system.  
z Front Left (L) Center Front Right (R)  
Rear Right (R) Rear Left (L)  
Select 5.1 Speaker Setupusing the 3/4but-  
tons on the setup menu.  
1
While 5.1 Speaker Setupis selected, press 2  
2 button.  
Return  
Press 1/2buttons to select the desired speaker.  
Press ENTER to return to the previous menu.  
3
4
Adjust options by using 3/4/1/2buttons.  
Speaker selection  
Select a speaker that you want to adjust. (Front speak-  
ers (Left), Front speakers (Right), Center Speaker, Rear  
speakers (Left), Rear speakers (Right), or Subwoofer)  
Volume  
Press 1/2to adjust the output level of the selected  
speaker. (-10dB - 0dB)  
Size  
z Press 1/2to set a mode. (Large, Small or None)  
z If you have connected the system to a speaker with  
a low frequency of 100Hz or below, select Large.”  
z If you have connected the system to a speaker with-  
out a low frequency of 100Hz or below, select  
Small.If you have not connected a subwoofer,  
always select Largefor Front speaker (L/R).  
z When you do not have a certain speaker connected,  
select None.”  
z Front L/R speakers size can be set to Largeor  
Small.”  
z If Front L/R speakers size is set to Small,Rear and  
Center speakers size can be set only to Smallor  
None.”  
Subwoofers size can be set only to Large.  
z Subwoofers size can be set only to Largeor  
None.  
1-27  
 
Troubleshooting  
Check the following guide for the possible cause of a problem before contacting service.  
Cause  
Correction  
Symptom  
No power.  
z The power cord is disconnected.  
z Plug the power cord into the wall outlet  
securely.  
z No disc is inserted.  
z Insert a disc. (Check that the DVD or,  
audio CD indicator in the display  
window is lit.)  
The power is on, but  
the DVD player does  
not work.  
z The TV is not set to receive DVD signal z Select the appropriate video input mode  
No picture.  
output.  
on the TV so the picture from the DVD  
player appears on the TV screen.  
z The video cable is not connected  
securely.  
z Connect the video cable securely.  
z The connected TV power is turned off.  
z Turn on the TV.  
z The Progressive Scan is set to Onon  
the setup menu but is connected to a  
standard(analog) television.  
z Set Progressive Scan to Off”  
(see page 14).  
No sound./Buzzing  
sounds.  
z The equipment connected with the  
audio cable is not set to receive DVD  
signal output.  
z Select the correct input mode of the  
audio receiver so you can listen to the  
sound from the DVD player.  
z The audio cables are not connected  
securely.  
z Connect the audio cable securely.  
z The power of the equipment connected  
with the audio cable is turned off.  
z Turn on the equipment connected with  
the audio cable.  
z The Digital Audio Output is set to the  
wrong selection.  
z Press Setup on the remote control.  
Move the cursor down to Digital Audio  
Output. Press the right cursor. Select  
the correct output desired. Press  
ENTER. To get DTS sounds, Bit  
Stream/PCMhas to be selected. And  
use the Digital Output or Optical Out  
jack. Note that there will be no outputs  
at 6 ch analog outputs of this set for  
DTS selection. Next select the appropri-  
ate sampling frequency.  
If your equipment cannot receive 98  
KHz, please select 48 KHz or else  
buzzing sounds will be heard.  
The playback picture is  
poor.  
z The disc is dirty.  
z Clean the disc.  
z No disc is inserted.  
z Insert a disc. (Check that the DVD, or  
audio CD indicator in the DVD display is lit.)  
The DVD player does  
not start playback.  
z An unplayable disc is inserted.  
z The disc is placed upside down.  
z The disc is not placed within the guide.  
z Insert a playable disc. (Check the disc  
type, color system, and Regional code.)  
z Place the disc with the playback side  
down.  
z Place the disc on the disc tray correctly  
inside the guide.  
z The disc is dirty.  
z Clean the disc.  
z The Rating level is set.  
z Cancel the Rating function or change  
the rating level.  
The remote control  
does not work properly.  
z The remote control is not pointed at the  
remote sensor of the DVD player.  
z Point the remote control at the remote  
sensor of the DVD player.  
z The remote control is too far from the  
DVD player.  
z Operate the remote control within 23 ft  
(7 m).  
z There is an obstacle in the path of the  
remote control and the DVD player.  
z Remove the obstacle.  
z The batteries in the remote control are  
exhausted.  
z Replace the batteries with new ones.  
1-28  
 
Language Code List  
Enter the appropriate code number for the initial settings Disc Audio, Disc Subtitleand/or Disc Menu”  
(See page 14).  
Code Language  
Code Language  
Code Language  
Code Language  
6566  
6565  
6570  
8381  
6577  
6582  
7289  
6583  
6588  
6590  
6665  
6985  
6678  
6890  
6672  
6682  
6671  
7789  
6669  
7577  
6765  
9072  
6779  
7282  
6783  
6865  
7876  
6978  
6979  
6984  
7079  
Abkhazian  
Afar  
7074  
7073  
7082  
7089  
7176  
7565  
6869  
6976  
7576  
7178  
7185  
7265  
7387  
7273  
7285  
7383  
7378  
7365  
7165  
7384  
7465  
7487  
7578  
7583  
7575  
7589  
7579  
7585  
7679  
7665  
7686  
Fiji  
7678  
7684  
7775  
7771  
7783  
7776  
7784  
7773  
7782  
7779  
7778  
7865  
7869  
7879  
7982  
8065  
8083  
7065  
8076  
8084  
8185  
8277  
8279  
8285  
8377  
8365  
7168  
8382  
8372  
8378  
8368  
Lingala  
8373  
8375  
8376  
8379  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
Singhalese  
Slovak  
Slovenian  
Somali  
Spanish  
Sudanese  
Swahili  
Swedish  
Tagalog  
Tajik  
Finnish  
Lithuanian  
Macedonian  
Malagasy  
Malay  
Afrikaans  
Albanian  
Ameharic  
Arabic  
French  
Frisian  
Galician  
Georgian  
German  
Greek  
Malayalam  
Maltese  
Armenian  
Assamese  
Aymara  
Maori  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Marathi  
Azerbaijani  
Bashkir  
Moldavian  
Mongolian  
Nauru  
Tamil  
Basque  
Tatar  
Bengali; Bangla  
Bhutani  
Hebrew  
Hindi  
Nepali  
Telugu  
Thai  
Norwegian  
Oriya  
Bihari  
Hungarian  
Icelandic  
Indonesian  
Interlingua  
Irish  
Tibetan  
Tigrinya  
Tonga  
Breton  
Panjabi  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Pashto, Pushto  
Persian  
Turkish  
Turkmen  
Twi  
Polish  
Italian  
Portuguese  
Quechua  
Rhaeto-Romance  
Rumanian  
Russian  
Japanese  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kirghiz  
Ukrainian  
Urdu  
Chinese  
Corsican  
Croatian  
Czech  
Uzbek  
Vietnamese  
Volapük  
Welsh  
Samoan  
Sanskrit  
Danish  
Dutch  
Korean  
Scots Gaelic  
Serbian  
Wolof  
English  
Kurdish  
Laothian  
Latin  
Xhosa  
Esperanto  
Estonian  
Faroese  
Serbo-Croatian  
Shona  
Yiddish  
Yoruba  
Zulu  
Latvian, Lettish  
Sindhi  
1-29  
 
Area Code List  
Enter the appropriate code number for the initial setting Area Code(See 17).  
Code Area  
Code Area  
Code Area  
Code Area  
AD  
AE  
AF  
AG  
AI  
Andorra  
ER  
ES  
ET  
FI  
Eritrea  
LC  
Saint Lucia  
SC  
SD  
SE  
SG  
SH  
SI  
Seychelles  
United Arab Emirates  
Afghanistan  
Antigua and Barbuda  
Anguilla  
Spain  
LI  
Liechtenstein  
Sri Lanka  
Liberia  
Sudan  
Ethiopia  
LK  
Sweden  
Finland  
LR  
Singapore  
FJ  
Fiji  
LS  
Lesotho  
Saint Helena  
Slovenia  
AL  
Albania  
FK  
FM  
FO  
FR  
FX  
Falkland Islands  
Micronesia  
Faroe Islands  
France  
LT  
Lithuania  
AM  
AN  
AO  
AQ  
AR  
AS  
AT  
Armenia  
LU  
Luxembourg  
Latvia  
SJ  
Svalbard and Jan Mayen  
Islands  
Netherlands Antilles  
Angola  
LV  
LY  
Libya  
SK  
SL  
SM  
SN  
SO  
SR  
ST  
SU  
SV  
SY  
SZ  
TC  
TD  
TF  
Slovak Republic  
Sierra Leone  
San Marino  
Senegal  
Antarctica  
France (European  
Territory)  
MA  
MC  
MD  
MG  
MH  
MK  
ML  
MM  
MN  
MO  
MP  
MQ  
MR  
MS  
MT  
MU  
MV  
Morocco  
Argentina  
Monaco  
American Samoa  
Austria  
GA  
GB  
GD  
GE  
GF  
GH  
GI  
Gabon  
Moldavia  
Great Britain  
Grenada  
Madagascar  
Marshall Islands  
Macedonia  
Mali  
Somalia  
AU  
AW  
AZ  
BA  
BB  
BD  
BE  
BF  
BG  
BH  
BI  
Australia  
Suriname  
Aruba  
Georgia  
Saint Tome and Principe  
Former USSR  
El Salvador  
Syria  
Azerbaidjan  
Bosnia-Herzegovina  
Barbados  
French Guyana  
Ghana  
Myanmar  
Mongolia  
Gibraltar  
Bangladesh  
Belgium  
GL  
GM  
GN  
GP  
GQ  
GR  
GS  
Greenland  
Gambia  
Macau  
Swaziland  
Northern Mariana Islands  
Martinique (French)  
Mauritania  
Montserrat  
Malta  
Turks and Caicos Islands  
Chad  
Burkina Faso  
Bulgaria  
Guinea  
Guadeloupe (French)  
Equatorial Guinea  
Greece  
French Southern  
Territories  
Bahrain  
Burundi  
TG  
TH  
TJ  
Togo  
BJ  
Benin  
S. Georgia & S. Sandwich  
Isls.  
Mauritius  
Thailand  
BM  
BN  
BO  
BR  
BS  
BT  
BV  
BW  
BY  
BZ  
CA  
CC  
CF  
CG  
CH  
CI  
Bermuda  
Maldives  
Tadjikistan  
Tokelau  
Brunei Darussalam  
Bolivia  
GT  
GU  
GW  
GY  
HK  
HM  
Guatemala  
Guam (USA)  
Guinea Bissau  
Guyana  
MW Malawi  
TK  
TM  
TN  
TO  
TP  
TR  
TT  
MX  
MY  
MZ  
NA  
NC  
NE  
NF  
NG  
NI  
Mexico  
Turkmenistan  
Tunisia  
Brazil  
Malaysia  
Bahamas  
Mozambique  
Namibia  
Tonga  
Bhutan  
Hong Kong  
Heard and McDonald  
Islands  
East Timor  
Turkey  
Bouvet Island  
Botswana  
New Caledonia (French)  
Niger  
Trinidad and Tobago  
Tuvalu  
Belarus  
HN  
HR  
HT  
HU  
ID  
Honduras  
Croatia  
Norfolk Island  
Nigeria  
TV  
TW  
TZ  
Belize  
Taiwan  
Canada  
Haiti  
Nicaragua  
Netherlands  
Norway  
Tanzania  
Cocos (Keeling) Islands  
Central African Republic  
Congo  
Hungary  
NL  
NO  
NP  
NR  
NU  
NZ  
OM  
PA  
UA  
UG  
UK  
UM  
Ukraine  
Indonesia  
Ireland  
Uganda  
IE  
Nepal  
United Kingdom  
USA Minor Outlying  
Islands  
Switzerland  
Ivory Coast  
Cook Islands  
Chile  
IL  
Israel  
Nauru  
IN  
India  
Niue  
CK  
CL  
CM  
CN  
CO  
CR  
CS  
CU  
CV  
CX  
CY  
CZ  
DE  
DJ  
IO  
British Indian Ocean  
Territory  
New Zealand  
Oman  
US  
UY  
UZ  
VA  
VC  
United States  
Uruguay  
Cameroon  
China  
IQ  
Iraq  
Panama  
Uzbekistan  
Vatican City State  
Saint Vincent &  
Grenadines  
Venezuela  
Virgin Islands (British)  
Virgin Islands (USA)  
Vietnam  
IR  
Iran  
PE  
PF  
PG  
PH  
PK  
PL  
Peru  
Colombia  
IS  
Iceland  
Polynesia (French)  
Papua New Guinea  
Philippines  
Pakistan  
Costa Rica  
Former Czechoslovakia  
Cuba  
IT  
Italy  
JM  
JO  
JP  
KE  
KG  
KH  
KI  
Jamaica  
VE  
VG  
VI  
Jordan  
Cape Verde  
Christmas Island  
Cyprus  
Japan  
Poland  
Kenya  
PM  
PN  
PR  
PT  
PW  
PY  
QA  
RE  
RO  
RU  
RW  
SA  
SB  
Saint Pierre and Miquelon  
Pitcairn Island  
Puerto Rico  
Portugal  
VN  
VU  
WF  
WS  
YE  
YT  
YU  
ZA  
ZM  
ZR  
ZW  
Kyrgyzstan  
Cambodia6  
Kiribati  
Vanuatu  
Czech Republic  
Germany  
Wallis and Futuna Islands  
Samoa  
Djibouti  
KM  
KN  
KP  
KR  
KW  
KY  
KZ  
LA  
LB  
Comoros  
Saint Kitts & Nevis Anguilla  
North Korea  
South Korea  
Kuwait  
Palau  
Yemen  
DK  
DM  
DO  
DZ  
EC  
EE  
EG  
EH  
Denmark  
Paraguay  
Mayotte  
Dominica  
Qatar  
Yugoslavia  
South Africa  
Zambia  
Dominican Republic  
Algeria  
Reunion (French)  
Romania  
Ecuador  
Cayman Islands  
Kazakhstan  
Laos  
Russian Federation  
Rwanda  
Zaire  
Estonia  
Zimbabwe  
Egypt  
Saudi Arabia  
Solomon Islands  
Western Sahara  
Lebanon  
1-30  
 
Specifications  
General  
Power requirements  
Power consumption  
Dimensions (approx.)  
Mass (approx.)  
AC 110-240V, 50/60 Hz  
14W  
430 X 60 X 242 mm (16.9 x 2.4 x 9.5 inches) (w x h x d)  
2.45 kg (5.4 lbs)  
Operating temperature  
Operating humidity  
5˚C to 35˚C (41˚F to 95˚F)  
5 % to 90 %  
System  
Laser  
Semiconductor laser, wavelength 650 nm  
PAL/NTSC  
Signal system  
Frequency response  
DVD (PCM 96 kHz): 8 Hz to 44 kHz  
DVD (PCM 48 kHz): 8 Hz to 22 kHz  
CD: 8 Hz to 20 kHz  
Signal-to-noise ratio  
Harmonic distortion  
Dynamic range  
More than 100dB (ANALOG OUT connectors only)  
Less than 0.008%  
More than 100 dB (DVD)  
More than 95 dB (CD)  
Outputs  
VIDEO OUT  
S-VIDEO OUT  
1 Vp-p 75 , negative sync, RCA jack x 1/ SCART(AV)  
(Y) 1.0 V (p-p), 75 , negative sync, Mini DIN 4-pin x 1  
(C) 0.3 V (p-p) 75 Ω  
COMPONENT VIDEO OUT  
(Y) 1.0 V (p-p), 75 , negative sync, RCA jack x 1  
(Pb)/(Pr) 0.7 V (p-p), 75 , RCA jack x 2  
Audio output (digital audio)  
Audio output (optical audio)  
Audio output (analog audio)  
0.5 V (p-p), 75 , RCA jack x 1  
5 V (p-p), 75 , Optical connector x 1  
2.0 Vrms (1 KHz, 0 dB), 600 , RCA jack (L, R) x 1/ SCART(AV)  
Accessory  
Video cable . . . . . . . . . . . . . . . . . . . . . . .1  
Audio cable . . . . . . . . . . . . . . . . . . . . . . .1  
Remote control . . . . . . . . . . . . . . . . . . . .1  
Batteries . . . . . . . . . . . . . . . . . . . . . . . . .2  
z Design and specifications are subject to change without notice.  
Manufactured under license from Dolby Laboratories. Dolby, MLP Lossless and the double-D symbol are trademarks of Dolby  
Laboratories. Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved.  
DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc.  
1-31  
 

Indesit Washer Dryer WD 11 User Manual
JAMO Speaker 660A2 User Manual
JVC Car Stereo System GET0638 002A User Manual
JVC Car Stereo System LVT1982 002A User Manual
Kenwood Stereo Receiver KR 897 User Manual
Kingston Technology Computer Drive DTLPG3 User Manual
KitchenAid Blender 4KFP740CR0 User Manual
KitchenAid Oven KEBK171 User Manual
Klipsch Portable Speaker La Scala II User Manual
Kompernass Bread Maker KH 1170 User Manual