Kicker Stereo System KM6202 User Manual

2006 KM Component b01.qxp 2/8/2006 5:35 PM Page 1  
KM  
KMCOMPONENTSYSTEM  
KM620.2, KM625.2  
©2006 Stillwater Designs  
 
2006 KM Component b01.qxp 2/8/2006 5:35 PM Page 3  
TweeterMounting  
Figure 5  
The tweeter can be mounted one of three ways: flush, surface and angled mounting. For  
flush mounting applications, please refer to the illustration in Figure 5. Choose a flat  
location on the panel with space behind the panel to allow room for the mounting nut. After  
checking the clearances, cut the appropriate mounting hole diameter in the panel (see the  
chart below). Place the shorter mounting nut behind the panel. Feed the wire through the  
hole in the panel and the mounting nut. Mount the tweeter by screwing the mounting nut  
onto the tweeter.  
Flush Mount  
Shorter Mounting Nut  
Panel  
For surface mounting applications use the surface mount cup as a template and pre-drill  
two 7/64” (2.5mm) screw holes for attaching the mounting cup to the panel, and a 5/16”  
(8mm) hole for the wires. Two #8 flathead stainless steel sheet metal screws are supplied to  
attach the mounting cup to the panel. Position the tweeter over the mounting cup and press  
it into position. See Figure 5.  
For angled mounting applications choose a flat location on the panel with space behind the  
panel to allow room for the mounting nut and back angle ring. After checking the  
clearances, cut the appropriate mounting hole diameter in the panel (see the chart below).  
Place the front angle ring (does not fit through the longer tweeter mounting nut) in front of  
the panel. Then place the wire and tweeter through the front angle ring and into the panel.  
Next place the wire through the back angle ring (fits through the longer tweeter mounting  
nut), place the back angle ring over the rear of the tweeter, and line-up the narrow part of  
the front angle ring for the preferred angle of operation. Place the wire through the longer  
tweeter mounting nut and loosely tighten the mounting nut around the tweeter. Rotate all the  
parts in unison until the tweeter is angled in the desired direction. Secure the assembly by  
tightening the tweeter mounting nut. See Figure 5.  
Surface Mount  
Surface Mount Cup  
Back Angle Ring  
Panel  
Wiring  
Carefully place the speaker wire in a location that is clear of standing water and moving  
components of the vessel. For reference, the Blue wire is Positive and the Silver wire is  
Negative. Mount the crossover to the woofers back plate with the enclosed phillips-head  
M3 stainless steel machined screws, or mount the crossover remotely in a location free and  
clear of standing water. The locking crossover cover with water resistant gasket is  
removable for wiring installation; it helps prevent terminal corrosion and electrical shorting.  
The positive and negative gold plated terminals are of different sizes and correspond to the  
appropriate gold plated positive and negative wire connectors. Take off the crossover cover,  
and connect the wire from the woofer to the “WF” terminal and the wire from the tweeter to  
the “TW” terminal. Connect the supplied 15 feet (4.5m) of wire to “IN” terminal in the  
crossover. Carefully route the wires through the slot between the crossover and crossover  
cover, and snap the crossover cover back on the crossover. Connect the other end of the  
heavy gauge wire to your amplifier in accordance with its owner's manual. See Figure 4.  
Angled Mount  
Front Angle Ring  
Panel  
Longer Mounting Nut  
Performance  
Model:  
KM620.2  
6 (16)  
KM625.2  
Woofer Size, in (cm)  
Tweeter Size, in (cm)  
Dome Material  
6 (16)  
3/4 (2.0)  
Titanium  
4
1 (2.5)  
Titanium  
4
Nominal Impedance [Zn], ohm  
Power Handling Watts, Peak (RMS)  
Sensitivity [SPLo], dB @ 1W, 1m  
Effective Frequency Range, Hz  
195 (65)  
88  
225 (75)  
88  
Crossover Cover  
35-21k  
5 1/8 (13)  
2 7/8 (7.2)  
1 9/16 (4.0)  
18, 4000  
12, 4000  
Yes  
35-21k  
5 1/8 (13)  
2 7/8 (7.2)  
1 15/16 (4.8)  
18, 4000  
12, 4000  
Yes  
Woofer Mounting Hole Diameter, in (cm)  
Woofer Mounting Depth w/o Crossover, in (cm)  
Flush Mounting Tweeter Hole Diameter, in (cm)  
High Pass, dB, at Frequency, Hz  
Low Pass, dB, at Frequency, Hz  
Bolt-Thru Grilles  
Crossover mounted to  
the KM Component  
Woofer’s Back Plate  
Slot  
Figure 4  
Kicker Marine speakers use the highest level of magnetic shielding available to minimize compass and gauge deviation in your dash.  
Kicker Marine speakers meet or exceed industry standards for environmental humidity and corrosion,  
and for material degradation due to UV exposure.  
KMCOMPONENTSYSTEM  
4
5
 
2006 KM Component b01.qxp 2/8/2006 5:35 PM Page 4  
AcousticsLimitedWarranty  
InternationalWarranty  
Kicker warrants this product to be free from defects in material and workmanship under normal use for a period of  
THREE (3) MONTHS from date of original purchase with receipt. When purchased from an Authorized KICKER Dealer  
it is warranted for ONE (1) YEAR from date of original purchase with receipt. In all cases you must have the original  
receipt. Should service be necessary under this warranty for any reason due to manufacturing defect or malfunction  
during the warranty period, Kicker will repair or replace (at its discretion) the defective merchandise with equivalent  
merchandise at no charge. Warranty replacements may have cosmetic scratches and blemishes. Discontinued  
products may be replaced with more current equivalent products.  
Contact your International Kicker dealer or distributor concerning specific procedures for your country's warranty  
policies.  
WARNING: KICKER products are capable of producing sound levels that can permanently damage your hearing!  
Turning up a system to a level that has audible distortion is more damaging to your ears than listening to an  
undistorted system at the same volume level. The threshold of pain is always an indicator that the sound level is too  
loud and may permanently damage your hearing. Please use common sense when controlling volume.  
This warranty is valid only for the original purchaser and is not extended to owners of the product subsequent to the  
original purchaser. Any applicable implied warranties are limited in duration to a period of the express warranty as  
provided herein beginning with the date of the original purchase at retail, and no warranties, whether express or  
implied, shall apply to this product thereafter. Some states do not allow limitations on implied warranties; therefore  
these exclusions may not apply to you. This warranty gives you specific legal rights; however you may have other  
rights that vary from state to state.  
GARANTÍA INTERNACIONAL  
VersiónEspañol  
Comuníquese con su concesionario o distribuidor Kicker internacional para obtener infor ación sobre procedimientos  
específicos relacionados con las normas de garantía de su país.  
ADVERTENCIA: Los excitadores Kicker son capaces de producir niveles de sonido que pueden dañar  
permanentemente el oído. Subir el volumen del sistema hasta un nivel que produzca distorsión es más dañino para el  
oído que escuchar un sistema sin distorsión al mismo volumen. El dolor es siempre una indicación de que el sonido es  
muy fuerte y que puede dañar permanentemente el oído. Sea precavido cuando controle el volumen.  
WHAT TO DO IF YOU NEED WARRANTY OR SERVICE  
Defective merchandise should be returned to your local Authorized Stillwater Designs (Kicker) Dealer for warranty  
Designs directly. You can confirm that a dealer is authorized by asking to see a current authorized dealer window  
decal.  
La frase "combustible para vivir la vida Livin' Loud™ a todo volumen" se refiere al entusiasmo por la vida que la marca  
Kicker de estéreos de automóvil representa y a la recomendación a nuestros clientes de que vivan lo mejor posible ("a  
todo volumen") en todo sentido. La línea de altavoces y amplificadores Kicker es la mejor del mercado de audio de  
automóviles y por lo tanto representa el "combustible" para vivir a todo volumen en el área de "estéreos de automóvil"  
de la vida de nuestros clientes. Recomendamos a todos nuestros clientes que obedezcan todas las reglas y  
reglamentos locales sobre ruido en cuanto a los niveles legales y apropiados de audición fuera del vehículo.  
If it becomes necessary for you to return defective merchandise directly to Stillwater Designs (Kicker), call the Kicker  
Customer Service Department at (405) 624-8510 for a Return Merchandise Authorization (RMA) number. Package all  
defective items in the original container or in a package that will prevent shipping damage, and return to:  
INTERNATIONALE GARANTIE  
DeutscheVersion  
Stillwater Designs, 5021 North Perkins Road, Stillwater, OK 74075  
Nehmen Sie mit Ihren internationalen Kicker-Fachhändler oder Vertrieb Kontakt auf, um Details über die  
Garantieleistungen in Ihrem Land zu erfahren.  
The RMA number must be clearly marked on the outside of the package. Please return only defective components.  
The return of functioning items increases your return freight charges. Non-defective items will be returned freight-  
collect to you.  
WARNUNG: KICKER-Treiber können einen Schallpegel erzeugen, der zu permanenten Gehörschäden führen kann!  
Wenn Sie ein System auf einen Pegel stellen, der hörbare Verzerrungen erzeugt, schadet das Ihren Ohren mehr, als ein  
nicht verzerrtes System auf dem gleichen Lautstärkepegel. Die Schmerzschwelle ist immer eine Anzeige dafür, dass  
der Schallpegel zu laut ist und zu permanenten Gehörschäden führen kann. Seien Sie bei der Lautstärkeeinstellung  
bitte vernünftig!  
Include a copy of the original receipt with the purchase date clearly visible, and a "proof-of-purchase" statement listing  
the Customer's name, Dealer's name and invoice number, and product purchased. Warranty expiration on items  
without proof-of-purchase will be determined from the type of sale and manufacturing date code. Freight must be  
prepaid; items sent freight-collect, or COD, will be refused.  
Der Slogan "Treibstoff für Livin' Loud" bezieht sich auf die mit den Kicker-Autostereosystemen assoziierte  
Lebensfreude und die Tatsache, dass wir unsere Kunden ermutigen, in allen Aspekten ihres Lebens nach dem Besten  
("Livin' Loud") zu streben. Die Lautsprecher und Verstärker von Kicker sind auf dem Markt für Auto-Soundsysteme  
führend und stellen somit den "Treibstoff" für das Autostereoerlebnis unserer Kunden dar. Wir empfehlen allen unseren  
Kunden, sich bezüglich der zugelassenen und passenden Lautstärkepegel außerhalb des Autos an die örtlichen  
Lärmvorschriften zu halten.  
WHAT IS NOT COVERED?  
This warranty is valid only if the product is used for the purpose for which it was designed.  
It does not cover:  
o Damage due to improper installation  
o Subsequent damage to other components  
o Damage caused by exposure to moisture, excessive heat, chemical cleaners, and/or UV radiation  
o Damage through negligence, misuse, accident or abuse. Repeated returns for the same damage may be  
considered abuse  
GARANTIE INTERNATIONALE  
VersionFrançaise  
Pour connaître les procédures propres à la politique de garantie de votre pays, contactez votre revendeur ou  
distributeur International Kicker.  
o Any cost or expense related to the removal or reinstallation of product  
o Speakers damaged due to amplifier clipping or distortion  
o Items previously repaired or modified by any unauthorized repair facility  
o Return shipping on non-defective items  
AVERTISSEMENT: Les haut-parleurs Kicker ont la capacité de produire des niveaux sonores pouvant endommager  
l'ouïe de façon irréversible ! L'augmentation du volume d'un système jusqu'à un niveau présentant une distorsion  
audible endommage davantage l'ouïe que l'écoute d'un système sans distorsion au même volume. Le seuil de la  
douleur est toujours le signe que le niveau sonore est trop élevé et risque d'endommager l'ouïe de façon irréversible.  
Réglez le volume en faisant prevue de bon sens !  
o Products with tampered or missing barcode labels  
o Products returned without a Return Merchandise Authorization (RMA) number  
o Freight Damage  
o The cost of shipping product to Kicker  
o Service performed by anyone other than Kicker  
L'expression " carburant pour vivre plein pot " fait référence au dynamisme de la marque Kicker d'équipements audio  
pour véhicules et a pour but d'encourager nos clients à faire le maximum (" vivre plein pot ") dans tous les aspects de  
leur vie. Les haut-parleurs et amplificateurs Kicker sont les meilleurs dans le domaine des équipements audio et  
représentent donc pour nos client le " carburant pour vivre plein pot " dans l'aspect " installation audio de véhicule "  
de leur vie. Nous encourageons tous nos clients à respecter toutes les lois et réglementations locales relatives aux  
niveaux sonores acceptables à l'extérieur des véhicules.  
HOW LONG WILL IT TAKE?  
Kicker strives to maintain a goal of 24-hour service for all acoustics (subwoofers, midrange drivers, tweeters,  
crossovers, etc) returns. Delays may be incurred if lack of replacement inventory or parts is encountered.  
Failure to follow these steps may void your warranty. Any questions can be directed to the Kicker Customer Service  
Department at (405) 624-8510.  
MEMBER OF  
To get the best performance from your new Kicker Subwoofer, we recommend using genuine Kicker Accessories and Wiring.  
National Marine  
Manufacturers Association  
P.O. Box 459 • Stillwater, Oklahoma 74076 • U.S.A. • (405) 624-8510  
02082006+06KMCS  
KMCOMPONENTSYSTEM  
6
7
 

IOGear Network Card GBU241W6 User Manual
ION Turntable LP 2 CD User Manual
JL Audio Car Amplifier G4500 User Manual
JVC Car Stereo System GET0139 001A User Manual
JVC Digital Camera TK C1431 User Manual
JVC Speaker System UX G1 User Manual
Kenmore Clothes Dryer 69902 User Manual
Kenwood Car Stereo System DPX MP7090U User Manual
Konica Minolta Oxygen Equipment PULSOX 300 User Manual
Kowa Digital Camera nonmyd WX 3D User Manual