Ken A Vision Microscope Magnifier T 1922 User Manual

push, and turn clockwise . For fluorescent lamp pull out of socket and remove

to install push new lamp into socket.

c. Avoid touching the glass surface of the bulb with bare hand. Any oil

brought onto the bulb by the bare hand will negatively affect the heat dissi-

pation and shorten the life of the bulb. Clean the bulb surface if the user has

touched the bulb surface accidentally.

e. Replacement bulbs may be purchased on Ken-A-Vision web site under

CARE AND MAINTENANCE

Your microscope is a fine precision instrument and should be treated with

care. When not in use it should be protected from dust by the plastic cover

provided. Lenses and eyepieces should be cleaned periodically with optical

lens tissue which is soft and lint free. Painted surfaces can be cleaned with a

moistened cloth.

When using the optional 100xR objective oil emersion lens, be sure not to

leave any oil on the lens after use. Dip a cotton swab or lens paper with a

small amount of denatured alcohol, and clean the lens surface carefully. Do

not use aggressive solvents to clean lens.

Ken-A-Vision has quality technicians on staff to repair or service your micro-

scopes. Ken-A-Vision recommends preventative maintence for optimal life of

the product. Contact us at 1.816.353.4787 for more details.

WARRANTY: TEN YEAR LIMITED WARRANTY AGAINST DEFECTIVE PARTS

AND WORKMANSHIP.

Comparison Scope

Instruction Manual

T-1922

5615 Raytown Road, Kansas City, MO 64133 U.S.A 816-353-4787 Fax. 816-358-5072

Email: info@ken-a-vision.com www.ken-a-vision.com

part# INS-SC81922